Hi

Thanks as always for your help!!

1. I swapped the motor wires around, then after many combination changes with the RX connection we got there!

2. Glad the wiring diagram looks ok.

3. So if I connect an XT60 connector to the fuse then solder in the light then join the other light wire to an XT60 connector with the Black battery wire in then connect this to the ESC?

I have 2 worries with this

a. I’d need a lot of solder to keep the thin wires in place in the XT60s- is this ok?

b. Just to confirm that the thin wires won’t prohibit power being routed through to the ESC and then to the motors causing us to to be even slower?

cheers

Jon