Password
Remember me?
Forgot your password?
Forgot your username?
Robots Live - Burgess Hill - 1st and 2nd April 2017
Extreme Robots - Manchester - 22nd and 23rd April 2017
Extreme Robots - Portsmouth - 6th and 7th May 2017
Extreme Robots - Guildford - 10th and 11th June 2017
Extreme Robots - Colchester - 9th and 10th September 2017
See all upcoming events
As your turning you have effectively a wedge trying to stick into the ground on the front edge of the wedge. try just smoothing over slightly the edge
We've been test driving Bolts around a little and noticed something I hadn't expected. Bolts often struggles to turn. Forwards and backwards works
I can have a go at some of your questions for you: 2) The drill you linked is thoroughly reviewed by one of the forum regulars here
Hi guys. Thank you for the advice and comments upon such things. But, as per usual with me, I've made a couple of decisions, but I have a lot of questions...
The first question that comes to mind, are you wanting to try and enter the TV show with your bot or stick to live events?
There's a couple of us trying to build 300A ESCs now. Personally I'm not a fan of directFETs, can't inspect joints, package is unique to
Should probably point out the 8mm chain Sam uses is T8F known often as 'minimoto' chain. The regular old 8mm is definitely a bit too thin.
Onyx has used 8mm chain as well and in three years it never snapped from not being strong enough.
Events
Forum Posts
Bolts - Featherweight Flail Bot
As your turning you have effectively a wedge trying to stick into the ground on the front edge of the wedge. try just smoothing over slightly the edge
Roboteernat Today, 15:27