Electric Axe featherweight - first build of FW

[Roboteernat]

The axe motor looks like a serious bit of kit

The motor started out being a Bosch drill motor, thinking I could adjust the clutch to allow a nice sack without damaging the motor, plus I had it spare.
Then in a box of bits I found several old electric scooter motors, one big and this one that's smaller. Thing is it's a 24v motor, so will be underpowered slightly.

10mm alu, the weight equivalent of 28mm of HDPE. Or 3mm of Hardox.

Thanks maddox, I may be adding some holes in that plate to bring weight down But keep rigidity, although since making that 2nd frame, I have amended he motor spacing again and need to recut the wooden mockup lol