PMEUMATICS

**jonny** · 28th October 2010, 18:04

i'm still on the lookout for a regulator myself

**Thunder arrow** · 28th October 2010, 18:52

its so hard to find good regulator that r cheap isnt it! (HINT,HINT :wink: :wink: robo challenge!)

**typhoon_driver** · 28th October 2010, 20:10

I got a Co2/Argon regulator 60 bar inlet 10 bar outlet

I'd assume that it's probably one designed for use with a welder similar to these here,

http://shop.ebay.co.uk/?_from=R40&_trks ... Categories

**Thunder arrow** · 29th October 2010, 11:12

has anyone used 10 bars on a valve with a working bars at max 8?

**woody** · 29th October 2010, 13:25

Yes ...
Should you.... NO the manufacturers max should be observed.

**Thunder arrow** · 29th October 2010, 17:30

just got home and the cylinder has come!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!

its inline with my ipod touch and its 5 inches long when its fired and the stroke is 40mm, and is 3 cm wide and the bore is 16mm

i am running it at 144 psi/10 bars and working pressure max is 145psi and max pressure is 160 psi

**jonophilpott** · 29th October 2010, 19:36

Im not having a dig but isnt that a little on the small side :/
Did you use the Calculators people suggested?

Ive calculated that above flipper tip you'll get an air time of 0.02 meters