sabre

[typhoon_driver]

Finally decided on the name of my next featherweight and spent some time working on the CAD side of things.

For those that don't know I bought the frame and disc off kenny for the vert spinner he was building. Quick spec below,

- 3.6kg tool steel vertical disc, going at roughly 4500rpm
- powered by two brushless motors with a combined output of around 9hp (give or take)
- 10 cell lipos
- bosch 35s for drive
- full titanium chassis

Spent this evening reverse engineering the current frame and disc assembly into pro engineer allowing me to now go on and design the chassis and other parts into the design.