Register To Comment
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21

Thread: 1000psi Relief Valves

  1. #11
    kane's Avatar
    Roboteer

    I personnally dont see the need for a 1000psi relief device before a low pressure regulator.

    The device comes from the robot wars days when we started to see the first high pressure robots and some of the technical people knew nothing about the properties of CO2 (e.g. trying to fill bottles by pressure).

    Today it is mainly a fair play device for the high pressure boys and a bit of a safety device.

    Regulators are designed to be connected directly to the bottle without additional relief devices and the breakdown of the regulator would be vented by the low pressure relief device anyway. The addition of a 1000psi relief device only adds to the complexity, cost and weight in such a setup.
    Kane Aston
    http://www.makerobotics.com

    Co-owner and builder of BEHEMOTH

  2. #12

  3. ahh we could see Cronus back then

  4. #14
    kane's Avatar
    Roboteer

    As long as the pressure doesnt exceed 1000psi you can already use high pressure AIR tanks.
    Kane Aston
    http://www.makerobotics.com

    Co-owner and builder of BEHEMOTH

  5. #15




  6. kane's Avatar
    Roboteer

    This is cleared up in the updated rules that will be on the website soon.
    Kane Aston
    http://www.makerobotics.com

    Co-owner and builder of BEHEMOTH

  7. #20
    stu's Avatar
    Member

    Still waiting for them to upload Kane.

    Mr Stu

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •