Hi,


My proposed drive system, but before I pull the trigger, I've probably
overlooked something. So was hoping for some advice before hand.


Motors
-> Electric E scooter 36 volt 1000 watt Motor chain drive Quantity: 2
s-l500.jpg


ESC
-> RageBridge 2 or Sabertooth Dual 32A Motor Controller Quantity: 1


Wheels
-> 10" Yellow Puncture Burst Proof Solid Rubber Sack Truck Trolley Wheel & Axle Quantity: 4
Link


Tx & Rx
-> HobbyKing HK6S 2.4Ghz FHSS 6Ch Tx & Rx (White) (Mode 1) Quantity: 1
Link


Batteries
-> Turnigy nano-tech 5000mah 5S 35~70C Lipo Pack Quantity: 2
Link


Charger
-> Turnigy TQ4 4x6S Lithium Polymer Battery Pack Charger Quantity: 1
Link




I'm aware chains and sprockets will be needed, but I was hoping to sort
this out little later down the line.

Initially I was thinking of 4 motors, but then i would also need 2 ESC, so i thought I would start with two motors and see how it goes.