Register To Comment
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Team Combat Penguin bargain bucket bonanza sale

  1. #1
    For sale:

    1x unused 9.6v drill motor w/ grub screws and reverse thread screw £10
    1x of the above but with snapped output shaft £5
    2x 75mm robochallenge wheels with nut insert £8 for the pair
    2x mini moto wheels, 1 is missing a bearing £5 each
    1x hobbywing 10 amp brushless esc £5
    1x 100mm stroke 50mm bore ram with front and rear pivot £25
    1x v tail mixer £3
    1x large homebase axe, fibreglass shaft about 90cm total length £20
    1x 24v drill, no charger £20
    1x 18v drill with charger, battery dyeing and casing cracked motor fine though £15

    also for sale:

    140mm bore 120mm stroke gravity style full pressure ram, mario made. 3, 1/2 inlets. selling because sponsor pulled out so i am left without the cash to complete a full pressure heavyweight, taking my heavy in a different direction and building some sort of low pressure flipper. for those of you ram size junkies yes it is bigger than the one in team invade's new heavy! £sensible offers considered

    i can put up pictures of any of the above, just ask. would accept/part exchange the following: pillar drill, 100mm-125mm bore 200mm-250mm stroke low pressure ram, victor regulator, bosch 750(s), front kart wheels, wotty or roboteq speed controller

  2. #2
    I've decided to keep the fp ram for the mean while

  3. #3
    fp ram back up for sale

    new items:

    11bar prv £10
    40mm bore 50mm stroke lp ram with rear pivot £10
    unused trevor regulator £40
    brand new unused chop saw+3 blades-perfect for cutting box section £ 50
    15x 1m lengths of 25mmx25mmx2mm steel box section £3.50/metre

    all other items still for sale

  4. #4
    Our ram size is silly, the one you have would pack one big flip and eat up gas

  5. #5
    15 good flips from a 5kg bottle, pulsed valves for 10bar self right

  6. #6
    3 metres of box section, 75mm wheels, lp prv and possibly v tail mixer sold.

    also for sale:

    brand new battleswitch £15
    titanium box, few holes in. used it to mount electronics in previously. £10

    possibly more to come

  7. #7
    How big and how thick is this titanium box?

    Might be better than the steel I'm currently planning to put on my ant.

  8. #8

  9. #9
    From memory the titanium is about 1mm thick, I'll measure it tomorrow for you as I forgot today

  10. #10
    battleswitch and trev reg gone

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •