got some teathing problems, anyone any help?

**mattsdragons** · 5th June 2011, 19:20

hi all

with my electrics today, im having a few issues

first, on channels 2 and 3 of my giantcod rc gear, with both motos plugged im, only one will resopond to the RC commands, the other just stays running yet if they go into channels 1 and 4, they run fine, but that involves them running of separate sticks

i need the left stick for my actuator and need both motors to drive on the right stick, anyone got any ways how i can achieve this and counter the issues im having?

**Anttazz** · 5th June 2011, 19:25

What ESC's is it you're using again?

**mattsdragons** · 5th June 2011, 19:29

electonize 15a with 25a fuses

**Anttazz** · 5th June 2011, 19:52

I can't find it on a quick search, but does the manual tell you which channel does what? Is it the same as Spektrum for example?

**mattsdragons** · 5th June 2011, 19:54

i didnt get one with it

channels 2 and 3 worked for drive for me in my last bot and i used the exact same set up but they just wont work in this one

**harry hills** · 5th June 2011, 19:55

ch1 and 2 is drive, 3 is the throttle

**mattsdragons** · 5th June 2011, 20:06

right, sorted that, but my actuator is acting up

the relay is on, its showing that its active, yet the actuator does nothing. i texted it on a 12v drill battery and that also did nothing, but im not sure if the battery is dead