Hi Guys
Got a long list of bits and bobs I want/need to sell.All these bits I have no use for and are taking up space in my shed so need to shift them.Below is a list of all the items and a link to pics of each.Send me a pm or email or something if you€™re interested in a certain lot.
Items:
€ Ansmann Nicad/Nimh charger discharger with wall plug
€ 3x relays details of spec seen in picture
€ 1x other relay
€ Electronize fr15hx controller (note I will find out which wire does what , and check condition)
€ Bag of mixed tamiya connectors different conditions
€ Mini steel claw made from 25mm box section L=210MM, H=130MM
€ 2 x mini moto tyres and hubs 250MM DIAMETER
€ ½ a zeobot base 6mm ali
€ Ali box 3mm thick (was going to be a small rat bot armour) L=280MM, W=200MM, H=55MM
€ Heatshrink flat width= 150mm, L=520MM
€ 4 scooter wheels with bearings used 90MM DIAMETER
€ 200:1 motor unsure of voltage but below 12v id say
€ 2x wheels bonded rubber, will fit bosch 35 motors W=25MM, 65MM DIAMETER
€ 1 x 14.4v drill and charger and batt, I would say not working tried to fix the trigger but no luck the motor will still be good I think, it is a 2 speed gearbox
€ Electronize switcher good for fw lifter
€ 4mm base (with holes) made up of 2X 2mm sheets ali L=550MM, W=280MM
€ Zeobot lifter bearing block
€ Misc plastic hub 100MM DIAMETER
€ Piece of 12mm hdpe
€ 8mm hdpe sheet (holes)
€ Bits of 10mm hdpe
€ Bits of 6mm poly carb
€ Bits of 6mm HDPE
€ Old psycho fling shell, 3mm stainless sheet , L=530mm, W=290MM, H=100MM, RAMP LENGTH = 220MM with lifter arm and hinge strong construction no dmage
€ Old fw flipper panel, 3mm steel sheet rusty, L=480MM, W=295MM
€ Old psycho fling frame fits the above shell
€ Selection of various sized bits of 3mm ali
€ 3mm steel sheet L= 600MM, W= 440MM
€ Old crumple zone fw armour, all 1.8mm ti
€ Selection of 3mm ali bent and previously used
€ Selection of 6mm ali pieces inc chequer plate
€ Old crumple zone front ramp x3 different variations
€ 2x stainless steel sheets 1.5mm thick, A) L=290MM, W=180MM B) L=290MM, W=205MM
€ Various bits of box section
€ 3.2mm hardox small bits
€ Bits of random steel
€ Small bits and offcuts, 1.8mm titanium
€ Mini robot chassis another rat bot thing T shaped , L=300MM, W=280MM, H=55MM

PHOTOS= http://s737.photobucket.com/albums/xx17 ... OR%20SALE/

All the photos titles should indicate which item listed above they relate to, as there is a wide selection here and some items I have invested money and time into the prices can be discussed privately.

Thanks for looking, any questions post here or pm me

Alexpsychoflingteam@hotmail.co.uk