Cicatrix Build Diary

[shakesc]

I have read of Botbitz not running well on 6S batteries, 5S being fine

[Anttazz]

Would be more than 6S, 24v NiMH

[Danjr1]

The botbitz 85a handles 6s fine. Am currently running that set up at the mo

[Anttazz]

Sweet, cheers Dan

[Anttazz]

Also, before I buy and risk making a mess of it, can you confirm that this is the adapter i'd use to attach Banebots wheels to a GR02?

http://www.technobotsonline.com/banebot ... -bore.html

[harry hills]

3mm bore.

[Anttazz]

Oops, clicked in the wrong one. Although it turns out the one I was going to click on is 2mm and not 12 as I believe it is suppose to be? Can't see them on there?

[RogueTwoRobots]

Closest thing I can see on the Technobots website is this:

http://www.technobotsonline.com/banebot ... -bore.html

In new money, the 1/2 bore is 12.7mm. The shaft of a GR02 is 12mm so that may be a bit too small; the adapter could rock a little, resulting in loosening grub screws and wheels falling off. Then again, it could be okay, could be worth buying them to try, although at £8.65 each it's not the cheapest might-not-work experiment.

[Anttazz]

Is there a better way to attach wheels than that closer to the bearing? How is it generally done?

[harry hills]

http://www.fightingrobots.co.uk/foru...p?f=111&t=5549

any use? this is the method i am planning to use for Massacre.