smash em up

[typhoon_driver]

160Amps eh? Sweet, I'll hook an etek up to one of those and lets see what happens

[daliad100]

I also bought some of them. I've tested them on a cordless screwdriver and they haven't blown up although they did cut out when reversing direction quickly because the battery voltage was dipping well below the cut off (only a 3.6v battery.)

[harry hills]

yes jonny, i know it may seem hypocritical but, they should learn from others mistakes and get the right stuff from the start.
i doubt they are real amps though so im just running some drills with them.
btw jordon how long did they take to get to you?

[jonny]

160Amps eh? Sweet, I'll hook an etek up to one of those and lets see what happens

they do a 320 amp version aswell

[typhoon_driver]

the wires on those controllers are the biggest giveaway. Absolutely tiny!

[harry hills]

im going for the divide by 10 stratagy, 160a =16a

[typhoon_driver]

up that 10 to 20 and you probably have a closer value to what it could truely handle continuously

[PJ-27]

For some context the peak ratings (probably what these cheap ESC are on about) on the Electronize 15amp ESC is 270amps.

[webby]

those speed controlers look fab but if the max volts is 7.2? would it be ok to run 7.2 on a 12volt motor? or do i over volt it?

[harry hills]

you can run it at 7.2v but the motors will not be as quick, 12v will be quicker and overvolting will be quickest