Team Invade's Build Diary

[Team Invade]

[RogueTwoRobots]

Very nice. I can see this becoming a yearly competition to see who can produce the best forum Christmas card

[Team Invade]

Introducing new antweight robot Gust

A four wheel drive pusher made from a 3D printed chassis. The wheels are made from lego tyres and 3D printed hubs. The speed controller is an Option D2 board and the receiver is an Orange RX from Hobbyking. It is powered by 2 sets of 3 70mAh lipo cells run in parallel, giving a total voltage of 7.4v and a capacity of 210mAh. It is switched on and off using a JST connector link held in a 3D printed cradle. It is armoured in HDPE and 1mm Titanium.











http://www.youtube.com/watch?v=k_NOOpjryVY

[billy breach]

wow..... i really like that

[Team Invade]

Website updated to include information:

http://www.teaminvade.co.uk/index_files/Page427.htm

[billy breach]

good effort on the website

[Team Invade]

More images can be seen HERE

All the repairs made have been completely superficial. All of the pneumatics, electronics and drive managed to withstand NST entirely. We've re-welded up the frame, made a new corner, and a few new other bits, and six panels (the back panel is still the same). All in all, nothing's changed, so it should work just as well as before, hopefully

Sorry to all those who thought they were going to have an easy time at Burgess Hill :P

[archie2000]

I have a 4wd ti ant.
how can you get a robot that good.
thus could be a serious rivalry

[archie2000]

what website do you use to make your website

[Team Invade]

Just done a website update for anyone that's interested

UK Champs event report: http://www.teaminvade.co.uk/index_files/Page421.htm
Burgess Hill event report: http://www.teaminvade.co.uk/index_files/Page972.htm

I've also recently uploaded a load of new videos onto youtube from the past few events, a couple of these are on the website aswell.