help with Gianitcod 2.4ghz 4-Channel Mode2 Transmitter neede

[Anttazz]

If your saying its not working in 1+2 try 3+4 I guess?

There does seem to be a few people unhappy with the T4EU on that link you posted.

[mattsdragons]

i have been very british and sent a message complaining and wanting too be sent the correct thing!

angry messages solve a lot of things

[harry hills]

with the binding you have to hold down the button. the new style transmitters and recivers are usless, i would advise getting someting better if your buget can streach to it.

[jonny]

the radiolink t4eu and the r6eh are the correct receiver/transmitter . not sure why they call it a giantcod transmitter/receiver set on the website though. for every radio system i've used it's been channel 1 and 2 for drive and channel 3 throttle. i'd say its probably a dodgy receiver or transmitter. as long as you don't remove the case off either of them giantcod will give you a refund although it usually takes 1-2 weeks to get your money back.

this may sound crazy, but have you tried violently shaking your transmitter up and down for about a minute? i do this to mine when it doesn't work and then it usually starts working

[mattsdragons]

the radiolink t4eu and the r6eh are the correct receiver/transmitter . not sure why they call it a giantcod transmitter/receiver set on the website though. for every radio system i've used it's been channel 1 and 2 for drive and channel 3 throttle. i'd say its probably a dodgy receiver or transmitter. as long as you don't remove the case off either of them giantcod will give you a refund although it usually takes 1-2 weeks to get your money back.

this may sound crazy, but have you tried violently shaking your transmitter up and down for about a minute? i do this to mine when it doesn't work and then it usually starts working

i got the r7eh reciever if that means anything

and i only have 2 thing (forgot what they are called) too go into the reciever, one from each speed controller

[jonny]

as far as i know the r7eh is the same as the r6eh in terms of compatibility but it has an extra channel and has the connections on the side. you should plug the connectors that come from your esc's into channel 1 and 2 on your receiver. it doesn't matter which ones in channel 1 and which ones in channel 2 as the servo reversing function can be used to correct this. the throttle channel is for the weapon (if you have one).

[mattsdragons]

i have done that but i still get nothing from it

[leorcc]

Do you have a servo and a receiver battery to hook up to the receiver outside the robot? That way you can at least determine if the receiver is responding to the transmitter and takes out as many variables as possible.

[mattsdragons]

i dont have a servo too hock up too it which is a shame.

i will post some pics soon of my set up too see if anyone can give me any help over it

[mattsdragons]

here are some phots (forgive my bad photography skills)
http://s568.photobucket.com/albums/ss12 ... e003-1.jpg
http://s568.photobucket.com/albums/ss12 ... e002-1.jpg
http://s568.photobucket.com/albums/ss12 ... e004-1.jpg

also, my rc stuff didnt come with crystals and i was wondering if i need too get some?