PMEUMATICS

[woody]

Theo ...
These sort of questions arises ALL the time in the early build of newbies.

The problem is your lack of understanding and the difficulty in transfering knowledge 2 you via this medium.

So I'll try once again.

I connect pneumatic ports together with nylon/plastic tube.
The nylon tube pushes into a fitting that is screwed into the port/s of the various components.
These fittings are available with many combinations of threads and push in tube sizes.

http://www.accltd.com/main.asp?category ... 4wodfF7aMA

I'd recommend 6mm nylon tube.

So your push fittings will be 1/8 bsp thread + 6mm tube for the ebay cylinder and 1/4 bsp thread + 6mm tube for the ebay valve.

Everything will then be connected together with 6mm tube.

... re=related


So ...You'll want fittings that suit your port thread size and nylon tube size.

Pic shows 1/8 bsp + 6mm push fit into cylinder then 6mm tube into a 1/4 bsp push fit.
AAA Battery in pic for scale.[attachment=0:37v7qes0]fittingss.jpg[/attachment:37v7qes0]