PMEUMATICS

[JagCrusher]

The supply to the Battleswitch (for your weapon) and the supply for your ESC are wired in parallel... so after the safety link you would have two red (positive) wires, one goes to the ESC and one goes to the Battleswitch. Then two black wires from the negative side of the battery, one to supply the ESC another to the switch.

(BTW, please can you just use basic .jpg images? I have no idea what a .pptx file is nor can my computer open them)

[woody]

more pics
[attachment=1:3itgvhd1]bat motor controller.JPG[/attachment:3itgvhd1]

[attachment=0:3itgvhd1]battle.jpg[/attachment:3itgvhd1]

[Thunder arrow]

soz for ur computer

i think i get it
be back with u so with more Q probs
Theo

[woody]

[attachment=0:21uot4ij]inside.jpg[/attachment:21uot4ij]



.pptx = power point presentation file.

[Thunder arrow]

yep my mircosoft word will not work :sad:

i get it now thx for all the help
(u should make a pneumatic guild and get a sticky)

Theo

[woody]

You might find my webpages helpful.

http://www.teamonslaught.fsnet.co.uk/

http://www.teamonslaught.fsnet.co.uk/tech.htm

[Thunder arrow]

Thx again just need to buy all the stuff and finsh my frame and get a vid on utube

Theo

[widow_twanky]

Thx again just need to buy all the stuff and finsh my frame and get a vid on utube

Theo

Having read through this thread I have one comment on you building a pneumatic flipper, do your research!! Firstly if it's planned well it will be quite cheap and you wont buy stuff you don't need, secondly if you take the time to understand how the pneumatics systems work then you're less likely to get your arm ripped off by your nice new flipper.

I wouldn't want to put anyone off going for a pneumatic system without any experience (now that would be hypocritical ) BUT it's easy to miss thing out which are there for your and everyone elses safety like regulators and pressure relief valves etc. Mistakes hurt in a potentially life changing way (not a good way). Woody has some really useful information and you can always turn up to an event (Like Portsmouth or Maidstone) and get someone to run you through how things go together.

Andy

[Thunder arrow]

Firstly I have go to an event and asked
and I have had 3 month of reseach just on the weapon ok
and I am not a dumb 10 year old kid

I know what u r saying and I do know safety is no.1 when
using a cut or welder


Theo

[Thunder arrow]

Hi

just going of pneumatics for abit.
I have 2 14.4v motors(and gears) and I was woundering
do I need 2 batterys in 2 parallel or 2 in series or just 1 battery


Theo