Hard Time's build diary

**death robotics** · 28th September 2010, 20:28

Ok lads. coold down, save the aggresion for the arena :twisted:

**Bodge Job** · 28th September 2010, 20:51

lol

**Laser** · 2nd October 2010, 14:54

Got a bench saw a few days ago... Tested wood on it and it cut fine blah blah blah.
Made the outer frame cutting the base and few little twiddly bits got some screws.

**Bodge Job** · 2nd October 2010, 14:55

sounds good

**Laser** · 2nd October 2010, 14:58

forgot to add I mucked up the back of the robot; once I had finished cutting I stupidly left the saw still spinning and I pulled one end of the plastic away pushing the other end into the spinning sawblade so there is a big curve one end.

**Bodge Job** · 2nd October 2010, 15:10

ha, lol.
did you have enough plastic to rebuild it

**Laser** · 2nd October 2010, 20:44

I dont have any left over, but luckily I'm cutting the bad end off because it is too big.

**Laser** · 3rd October 2010, 07:48

Cut the plastic last night, trimming it down to size today.

**Laser** · 13th October 2010, 08:08

Made a jig to make it all to size uploading pics of what it looks like so far.
Ordered 4 100mm blue wheels, hopefully coming today.Where is the best placed to get shafts and bearings?