POOP A SCOOP upgrades

[graeme]

The length of the motor wires dont matter as long as they are the same length or the esc wont detect the speed of the motor correctly. I had to shorten the wires from the lipo to esc on buzzbar so it should be ok but on ls4 they are a lot longer so ill have to add more caps on the wires.
Criag, Dont know yet, we are trying to get nipper working, will know for sure in the next few week

Have already ordrered 4 new lipos, i rung them first and they set up my account and when i log in all the prices have 40% off.

[sam_smith]

Thats pri impressive, I hadn't realised that the 3 phase motors were so much more efficient than PM's.

Look forward to seeing it in action. With the teeth staying on, I think its always got a good chance of going far with great drive, stablity and reliability.

[graeme]

New gearboxes fitted and new 1 way clutch on motor and motor cover, dont worry theres no big magnets in there
Just needs wiring up now and weighing then i can start on little flipper and hitter and ls4 and then big nipper

[PJ-27]

That brushless is Hooooooooooge!

What motors are you using for drive?

I'm gradually familiarising myself with the Little range of robots, but I seen no trace of LS1?

[graeme]

The motors are 12v speed 600 bb motors simalar to drill motors but a bit better quality
i cant find any pics for ls1 but it was a lot bigger than the current buzzbar(ls3) and it had two bars one on top and the other on the bottom and was powered by a 200w pancake motor and the armour and chassis was all 3mm ali.