Team Hydra Sale

**widow_twanky** · 29th April 2011, 22:13

Originally Posted by harry hills

ill take them little wheels as well

Harry, do you want to pm me with a list of stuff you want because i don't fancy fishing through here to find things.

**Ellis** · 29th April 2011, 22:17

Hi. I'm not completely familiar with some of valves you have here. I'm interested mainly in anything that releases instantly with as little obstruction for air passing through as possible. I am building an air gun, and slow releasing butterfly valves no longer cut it. Please enlighten me if you can on exactly how these valves work, are the electrically driven? What kind of pressures can they handle? Quick releasing? Standard plumbing style fittings?

Thanks.

**widow_twanky** · 29th April 2011, 22:20

OK, last little bits for the moment:

Two, 1mm stainless steel folded chassis. Probably pretty good for kilobots and stuff. Dimensions are 180mm wide x 160mm long x 30mm deep - Â£7.50 each.

Five pieces of 1mm stainless steel

1 of - 235mm x 160mm - Â£3.00
2 of - 185mm x 320mm - Â£4.00
2 of - 480mm x 170mm - Â£4.50

**widow_twanky** · 29th April 2011, 22:24

Originally Posted by Relentless

Hi. I'm not completely familiar with some of valves you have here. I'm interested mainly in anything that releases instantly with as little obstruction for air passing through as possible. I am building an air gun, and slow releasing butterfly valves no longer cut it. Please enlighten me if you can on exactly how these valves work, are the electrically driven? What kind of pressures can they handle? Quick releasing? Standard plumbing style fittings?

Thanks.

The 5/2 valves are suitable for low pressure pneumatics (10bar). They are electrically driven and operate in about 300ms. They use 1/4 fittings not standard plumbing fittings. A 5/2 valve allows a double acting cylinder to be used (push/pull cylinder) but you can blosk off one of the ports to make a 3/2 valve which will allow you to use a single acting cylinder.

**widow_twanky** · 30th April 2011, 00:35

list of stuff on ebay http://shop.ebay.co.uk/andy5555555555/m ... ksid=p3686 would be happy if people want to make me an offer for stuff. Can only say no can't I

**widow_twanky** · 30th April 2011, 22:43

OK, I know I said that was it for a while but I found a bit more today:

Three 20oz paintball bottles with screw type C02 valves - Â£30each

Six Robochallenge drill motor mounts - Â£12.50 a pair

Fire extinguisher valve - Â£7.50

24V featherweight Gold motor - Â£20

**widow_twanky** · 30th April 2011, 22:52

Featherweight drive gearbox. With 2 x 24V gold motors, mod 1 gears and 75mm wheels fixed to a piece of aluminium. Good base to start a feather - Â£70

Featherweight drive gearbox. With 2 x 24 gold motors, mod 1 gears and 63mm wheels fixed to a piece of aluminium. Come straight out of our featherweight Cylon. - Â£70

Set of Mod 1 gears fitted to 75mm wheel and 8mm hole for motor gear. Meeds making up into a gear box. Will fit any motor with 8mm shaft - Â£15