wood is good, some woodend bots have done amazingly well. My 4 kg wooden but survived more than 5 goes on teh arena flipper before the wood split.
wood is good, some woodend bots have done amazingly well. My 4 kg wooden but survived more than 5 goes on teh arena flipper before the wood split.
well not to boost or anything but block of wood came 4th at 07 fw champs
plus armour cost £15 for 2 sets of armour![]()
![]()
![]()
![]()
![]()
![]()
sounds like wood is proberly the best options, it will proberly be easyer for me to work with also.
im just going to wait untill i have the motors (xmas present), and then make some designs for the robot.
sorry for asking questions, but i cant figure out how i will connect the one battery i will have after conecting two together to 2 speed controllers?
split the negative from the battery 1 to each speedo and take 2 positives from the link 1 to each speedo ... job done also take another ngative from the battery to your power light and a positive from the link to the power light too .....![]()
ok thanks for the help, il get my dad to help with that part.
nt sure if its any help but...
just to explain jacks diagram, its a 2 dpdt switch setup to drive 2 drillmotors very very cheaply, it works amazingly well and only costs about 10 quid.
i used to use this set up in our first feather always worked well and very cheap and unlike a speedo they dont blow up:
ah ok i think i know what it is now.
so with this setup i wont need a speed controller?
Bookmarks