Quote Originally Posted by roamingrobots
is that a spectrum compatibility issue? They work fine on the 40 mhz we're using at the moment?
As I understand it the BEC doesn't have sufficient output to run the spectrum receiver whne the speed controllers are operating at the upper limit because it drops the current for the BEC circuit. This means the voltage drops to the receiver and it cuts out and resets.

Same problems we had with Hydra and BOOM and on the AR6000 receivers for the antweights.

Seem to recall the BEC is rated at 100mA and the spektrum receiver peaks at around 130mA. Could be wrong on the values but you get the point.

Andy