Swannys Bar

**swanaldo** · 23rd May 2007, 11:13

not sure if jonno driving envy and outing dtk at northampton should count as a score........2-1 to envy i think. NV is in the middle of a rebuild now with a more shallow angle flipper and wider at the front. changed from ni-cads to hawkers so i will be able fight almost every fight. if everything else holds up that is. looking more like now firestorm but not intentionally.

**swanaldo** · 27th May 2007, 14:22

been looking on e-bay and other places for a mig welder. there are names i am not familiar with and wondered if anyone could give any advice on wether they are good or bad.i am not loaded but i believe in you get what you pay for. so here are a few i am looking at....

Butters
Clarke
Sealey
Sip
Cebora

if anyone has got one or can reccommend one any info would be great.

i have the use of a nice esab 3 phase welder at the factory but i want a welder in my shed as i cant get to the factory all the time and when i can they are in use most of the time.

cheers cheers fellow roboteers

**swanaldo** · 4th June 2007, 20:38

well thanks for reccomendations folks.

no problem shane

hey what are we all here for

oh and thanks geoff.

**kodster** · 4th June 2007, 20:54

So, how many are there of you Shanes?

This also puts another question out on the table: if there are lots of Shanes, are there lots of ENVYs as well?

**swanaldo** · 5th June 2007, 15:01

there are lots of shanes and lots of bits of envy stroon around the place

**kodster** · 5th June 2007, 16:38

Then how many Shanes does it take to screw up an opposing robot?

**swanaldo** · 19th June 2007, 21:08

i feel good today.

**swanaldo** · 19th June 2007, 21:12

i am getting some ti. 6mm 8mm 10mm. not sure on sizes and shapes yet but i will be taking a load with me to events so if anyone wants some i will have some.