Had first drive and drum test yesterday... seems the new wheels and sides work perfect... with the dual rates set it drives perfect and it wont flip over un-predictably, i can actually hold it right on the edge as seen at the end of the vid... but if i flip the dual rates off on the tx switch, it flips instantly due to the higher turning speed... so basically if i need to turn it over i can just turn the rates off and have it flip easy... perfecto!



The drum was pulling too much current, and the belt was getting hot, think there's too much tension, so im going to turn a bit of the drum pulley OD and that should cure it

Oh... and i decided it looks boring so its getting painted if i have time before the champs.