Well i got the disc on.. ish

Here it is




Only problem is that the disc is now so thick that ir rubs ontop of the wheels, only on the edges by about 0.5mm, so im going to turn the width of the front wheels down abit so they sit up inside the new rim, They were always 5mm wider then the rears anyhow and ill loose abit of weight by doing it. Picture of the wheels rubbing the disc below;



Also Kenny (ALK Engineering) has machined me up some new rear axles from P20 (same material as the disc) which should be abit stronger then the old titanium ones which snaped due to a little white and black pushy robot






Ian- ill get the disk sent off to you tomorow for nitride coating :wink: