360 - mini hypnodisc

**Mouldy** · 17th July 2011, 17:42

Not much...

One way bearing fitted to brushless motor...

Eds done half of my disc mounts... Just need boring out for the bearings.

**Laser** · 17th July 2011, 17:52

have you got the drum yet? also what is the height and weight of the robot at the momtent?

**Mouldy** · 17th July 2011, 18:10

The base is 350x350 and the robot is 80mm high.

The drum weight is 2.2kg on the cad, I'm waiting until the bearing mounts are finished and mounted so I can check the dimensions against the cad before having the beater/drum made by Kenny at ALK engineering.

Total weight without the armor is around 10.3kg...should leave enough for a mostly shell.

**mattsdragons** · 17th July 2011, 18:15

its an all purpose bot, can run as a spinner for the champs but has enough power to be a FBH at any other events

**Laser** · 17th July 2011, 18:24

Also, what are the diametre of the wheels and how many teeth do the pulleys have?

**Mouldy** · 17th July 2011, 18:42

80mm as I said... Height of the robot. 14tooth pulleys

**Laser** · 17th July 2011, 19:34

so... the robot is 80mm and he wheels are 80mm, wouldnt that mean the wheels dont touch the ground?

**Mouldy** · 17th July 2011, 19:37

:| ... You asked for the height of the robot... It's invertable... So the highest point is the top of the Tyres... Which is 80mm from the ground. It has 5mm ground clearance top and bottom.

**Ellis** · 18th July 2011, 01:11

Natural enough to understand the height of the bot as the height of the chassis. For some reason I did it too, lol. Must be talent. :wink:

Bot is looking as sleek and lovely as ever. Can't wait to see what it can do. My only fear is that 2.2KG isn't all that much in drum terms, is it?