lol yh the drilling and taping is very annoying and yh hopefully the ali bulk heads will do the job

i've discovered for some reason the chassis is slightly twisted so at the front end 1 of the ali bulk heads is raised from the floor by 5mm and the other one touches the floor, i've taken it all apart and put it back together again and its still doing it:@, so i think ill just fill the gap between the floor and the bulk head with some 3mm ali and washers to make 5mm, or build the rest of the robot and before i mount the drum shaft i could sit lots of house bricks on it- to say that this is the first time i've made a robot in this way- i've made an alright job of it so far i think, and when it gets wrecked i'll improve on it

i've been doing alot of thinking- and i still can't decide whether im going to have wheel protetion yet, if not i might tape a tenner to each wheel to stop people hitting them.- without all the extra chassis around the wheels i could make the rest of the robot heavily armoured thou.

has anyone ever had a unprotected drill motor wheel ripped off????