il enter CrOokEd
jack
il enter CrOokEd
jack
Just to help you, Kody. Here are Jack's stats(From VRW Series 3):
CroOKeD
Shape: Box wedge
Dimensions: 100cm x 75cm wide x 50cm
Chassis: 6mm mild steel
Armour: 6mm Hardox at front, 6mm ti at back and sides
Weapon: A Co2 full pressure flipper at 750psi with 1 110mm ram,and a 2kg bottle,the arm is hinged at the back and made of 8mm mild steel
Drive: 2x 24v Magmotors, powered by 2x 12v SLA batteries wired in series.
Weight: 98kg
Locomotion:: 2 go-cart wheels
Ground clearance: 0mm at the front,and 2mm at the sides and the back
Speed: 10mph
Turning circle: 0m
Mkay, Jack, and where are the stats?
Mark, you now have 2WD instead of 6WD? Alright, your bot is accepted. And let Jack post his own stats. Again, you're doing stuff without people's permission. Jack might have wanted to update them. I know you're trying to help, but that's the wrong way to do it. Just stop that, please, or you will not be allowed to compete.
Okay.
But allow me to simply say that those are his latest stats as of their most recent posting.
Oooh!
Reserve me a place please, not sure what to enter yet.
I will enter Envy please. I think you know the stats
I do indeed. Thanks very much, Swanny.
Entrants
Gabriel V (Joey)
Minesweeper 1.1 (Mark)
Qwertyuiop (Navaha)
CrOokEd (Jack)
[reserved] (Andy)
Envy (Shane)
10 more spots.
I'll enter Next Stop Jupiter.
Weight: 100kg
Shape: Warrior SKF, with a wedge extension on the front.
Colour: Colours of the planet Jupiter, duh.
Dimensions: 100 X 81 X 21 cm
Power: 2 X LEM-130's @ 36v, powered by several NiCad Batteries, shock-proofed.
Wheels: 2 X Aluminium Wheels with Urethane Rubber for superb grip
Armour: 3.5mm Hardox for the wedge, 7mm Ti/V for top and bottom, 5mm hardox for the rim
Speed: Roughly 13 mph
Ground Clearence: Obviously 0mm for the front, and 6mm for anywhere else
Turning Circle: Zero... how many times do I have to tell you guys?!
Weapon: A nasty 27kg spinning rim powered by an LEM-130 Lynch, and spinning at 2000RPM. It also has 8 X hardox teeth on board. (Four on top, Four on Bottom) The rim can deliver some VERY nasty damage to another opponent. It can slice through titanium, and dent hardox without any problems. The motor is shock-mounted, to avoid killing itself from its own hits. The rim can also transfer its energy to the front kinetic flipper, thanks to a clutch. This flipper has a wedge extension which is nearly impossible to get under. The flipper can also throw robots with HUGE force. Can you say, OOTA?!
Srimech: Yes, it can run inverted... BUT the flipper can right the robot if needed.
Strengths: Can cause some EXTREME damage, Powerful Flipper, Shock-Proofed, A good all-rounder.
Weaknesses: A bit slow
Sorry, I screwed up on the stats again.
Minesweeper 1.1
Weight: 100kg
Shape: Tornado (S7)
Colour: Gold on top and bottom, Silver on the sides, with MINESWEEPER written on the sides in red. The scoops are bronze.
Dimensions: 90cm x 85cm x 25cm
Drive: 2x 36v LEM-130 motors, powered by 8x A123 Battlepacks. The motors power all 4 wheels via a belt system.
Locomotion: 4 Titanium/Vanadium alloy wheels with Vulkanized rubber tyres.
Armour: 6mm Hardox monocoque
Speed: 22mph
Ground Clearance: 0mm at front and back due to scoops, and 5mm at sides.
Turning Circle: 0m
Weapon: 2 solid Hardox snowplow-like scoops that can move slightly vertically, like Behemoth's, so I get good pushing power, but 0mm ground clearance at front and back. The robot also has a bunch of shockproofing around the belts, electronics, and motors, due to the fact that it was originally designed as a spinner killer/rambot.
Srimech: Invertible
Strengths: Super-reliable and fast. Good pushing ability.
Weaknesses: Not too much of an offensive weapon.
I'll enter Apocalypse II, stats in C&B4
Bookmarks