cheers John 1 it will be then, wheely bar hmm i do have 1 of them as well but the blades r bigger will need to mod that i think.
2 x 7 grinders ti bar 1m long with wheely bar [attachment=0:jl0ichcz]1 pic.jpg[/attachment:jl0ichcz]
cheers John 1 it will be then, wheely bar hmm i do have 1 of them as well but the blades r bigger will need to mod that i think.
2 x 7 grinders ti bar 1m long with wheely bar [attachment=0:jl0ichcz]1 pic.jpg[/attachment:jl0ichcz]
4 tags to watch out 4 ? think realy theres only 2 and both of them have a beauty in them and rip evo know ones ever seen it mixture of ti and hardox should be son of beauty .
Looking good. Presumably you'll have something (skids/runners/wires) outside the skateboard wheels to keep them central in the channel? Otherwise it will just go off to one side and probably jump out of the channel. Which would be bad.
yes john i have but that was the 1st pic
but it would be nice to know how high the sides are ?
4 or 102mm
How Wide is the track ? I forgot :P
1 foot, or 305mm
Everything's in the rules: http://home.btconnect.com/priorycastor/ ... grules.htm
Honestly, Jamie, I haven't read the rules, because I quite frankly couldn't care less. You should see my dragster, its currently still in bits.
But cheers for telling me the dimensions all the same
I would aim for making the width around 290-295 or something around that mark so your not rubbing too hard on the wall all the way down
Dave i am with you,as i have no idea about any of the rules,as i havn't read them either.My dragster was put together only so i can fight my robots.
Team Toon:
Heavyweight UK Champion 2015
Robot Wars World Annihilator Champion 2015
Heavyweight Tag Team Champion 2012
Featherweight UK Champion 2010
Featherweight Annihilator Champion 2009,2011 & 2014
Rebel Robots Champion 2009
Pika Annihilator Champion (Belgium) 2012
Tanja Trophy Winner 2010
Team Champions ( Team Barbie) 2011
Bookmarks