Dan would also like to enter!

Robot Name: Monsoon Season
Dimensions (L x W x H): 90cm x 80cm x 35cm
Shape: Box wedge, slanted sides and steep rear wedge.
Colour: The main body shell is black, with the flipper/ramming plate in bright green. The sides of the machine have skulls drawn on them in the same colour green as the flipper/ramming plate.
Weight: 110kg
Drive: 2 x LEM130s running at 36v, powered by a bunch of 36v NiCads.
Top Speed: Approx 15mph.
Tracks: This version of Monsoon has tracks instead of wheels, therefore allowing me to have an extra 10kg of weight in the machine. The tracks are made from Titanium/Vanadium alloy and have Vulcalon pads on every section of track in order to fully incorporate grip on the arena floor.
Armour: The baseplate is 5mm Titanium. The main body shell is constructed from a single piece of 30mm HDPE. The flipper/ramming plate is made from 4mm Hardox and covers the whole of the front of the machine.
Weaponry: At the front of the machine is a 4mm Hardox flipper/ramming plate, similar in style to Atomic from Series 7 of Robot Wars. The flipper/ramming plate is powered by 2 x 80mm bore 60mm stroke pneumatic rams, run off CO2 gas contained at 1000psi. The gas is held in 3 x 1.1kg CO2 gas canisters inside the robot, and should allow for plenty of flips in a battle (roughly 35 flips). The front of the machine can also be used as a ramming plate, allowing Monsoon Season to use its enormous pushing power as well as the ability to flip its opponents clean out of the arena.
Turning Circle: 0m
Ground Clearance: 0mm at front, 7mm at sides and back.
Srimech: Flipper.

Robot Name: Dervish: The l337 Generation
Dimensions (L x W x H): 40cm x 100cm x 40cm
Shape: Axlebot with triangular wheels guards€¦ look at the CAD. Unlike the CAD, the outsides of the wheel guards come to a slight point in the centre so the robot cannot rest on its side.
Weight: 100kg
Drive: 2 x S28-400 MagMotors running at 36v, powered by some 36v NiCad batteries.
Top Speed: 10mph
Wheels: 2 x custom made Titanium wheel hubs with Vulcalon tires for grip. The wheels are 8cm wide.
Armour: Each wheel guard is made from 4mm Hardox monocoque section. The beater is made from a single piece of Titanium 10cm thick.
Weapon: In the middle of the robot is a spinning beater made from a thick piece of Titanium. The beater is 40cm long and 10cm wide, with the centre of it being cut out, leaving a 10cm thick gap throughout the beater. In total the beater weighs roughly 22kgs. The beater is powered by a LEM130 lynch motor, geared appropriately to give a top speed of 1500RPM. Can you say, ouch?!
Turning Circle: 0m
Ground Clearance: 0mm when moving forwards due to the corners of the wheel guards going along the floor when it moves forward. 6mm when reversing.
Srimech: Invertible.

Robot Name: LowDown
Dimensions (L x W x H): The main body is 70cm x 40cm x 8cm
Shape: Invertible box with an angled < shaped back end and large bolts on the side to stop stranding.
Colour: The main shell is red, with the edges painted white. Lifting forks are red with white dots spray painted randomly over them.
Weight: Around 100kg, maybe a couple of kgs lighter.
Drive: 2 x S28-400 Magmotors running at 24v, powered by NiCads.
Top Speed: About 12mph.
Wheels: 6 x 10cm diameter wheels made from Titanium/Vanadium alloy and coated with Vulcalore. The robot has 3 wheels on each side, with the power going directly to the middle wheels. Each set of wheels is linked with a heavy duty rubber belt.
Armour: 4mm Hardox all over the machine bolted directly to the chassis (which is made from mild steel tubing) with thick Hardox bolts.
Weaponry: A pair of electronic lifting forks powered by 2 x S28-400 Magmotors running at 36v. The Mags are on a 75:1 reduction and can be used even when flipped. The Mags are powered by some 36v NiCad batteries. The forks are made from 6cm Hardox, are 20cm long and are cone-shaped, with the point facing the front.
Turning Circle: 0m
Ground Clearance: 1cm all over.
Srimech: Invertible.

Robot Name: Macbeth
Dimensions (L x W x H): 85cm x 75cm x 40cm
Shape: Invertible box, sides are slanted. The rear of the robot is completely vertical, like a normal box, but on the sides are two scooped blades that can be used when inverted.
Colour: Bright yellow with dark yellow trim.
Weight: 100kg
Drive: 2 x 750w Bosch motors running at 24v, powered by a bunch of 24v NiCad batteries.
Top Speed: 20mph, but stays at a conservative 14mph.
Wheels: 2 x 44cm diameter, 20cm wide Titanium/Vanadium alloy hubs, coated in Vulcalon for extra grip on the arena floor. Casters at the front of the machine (one on the top and one on the bottom) aid in manouverability and turning.
Armour: The whole robot covered in 2cm Polypropylene (light but incredibly strong), and according to Matweb weighs a total of 34kg. The rear scooped blades are made from 1cm thick Aluminium alloy.
Weaponry: At the front of the robot is a hefty spinning disc, 40cm in diameter and 3cm thick. It is made from Titanium and has 2 large Titanium blades attached to it, each weighing 5kg. In total the disc weighs 26kg. The weaponry is powered by a LEM130 Lynch motor at 36v geared down to the top speed of the blade is 1500RPM. The motor is powered by some 36v NiCads. The weapon is mounted differently compared to other horizontal spinners - it is placed on the underside of the robot so it can attack like an undercutter (like TopBot in RW).
Turning Circle: 0m
Ground Clearance: 4mm at front (protected by the spinner), 0mm at the back (due to the scooped blades) and 6mm at the sides.
Srimech: Invertible.