10mm piece of steel

**psycho_fling** · 26th February 2009, 09:03

Hi all

looking for the following

10mm x 100mm x 60mm steel piece

looking for as cheap as possible, any body with an off cut around this size etc please post

thanks alex

**widow_twanky** · 26th February 2009, 20:47

Alex,

Ive got a strip of steel we used for BOOM!, I think its 60mm x about 600mm x 8mm. Its stuff I picked up off a building site so didnt cost anything. It does have pre-drilled 12mm holes at about 300mm centres.

If its any good, its yours. You just need to pick it up or pay postage.

Andy

**john** · 26th February 2009, 21:39

when do you need it for? my dad can get 9mm from work but hes not at work for another 5 weeks

**xtreme** · 27th February 2009, 00:04

Ill see whats in the workshop tomorrow.

**psycho_fling** · 27th February 2009, 07:42

thnaks guys ill see if Tom has anything and then see which would be best

thanks for posting

alex

**psycho_fling** · 27th February 2009, 15:49

also lookng for some 4mm hardox or steel

80mm x 180mm

again anyone who can help?

cheers

**xtreme** · 27th February 2009, 17:37

I cut you some today incase you still need it. 100X60X10.
Just cut it off a length of 100X10 flat bar.

(Message edited by xtreme on February 27, 2009)

**psycho_fling** · 27th February 2009, 18:06

email sent Tom

**xtreme** · 1st March 2009, 17:40

Alex Got u the 100X60X10 Steel ready to send for tomorrow, Also i have a some 20mm Dia HDPE rod, I have a 100mm offcut if thats an ok for you, Dont think iv got any 4mm steel, I think I have 1,2,3,5,6mm and up but dont think i have any 4, Ill have another look tomorrow, Ill send the HDPE (if that size is ok)and the 10mm Steel in the morning and if I find anything else ill send u it later.