Motor is similar to the one in the link, the actual make is a Turnigy on not listed on thier website. Also Speed controller is a Turnigy as well.

Graeme has taken the motor apart and said its construction is good, and had the winding glued in by a local rewind company as they were a bit loose and dont want them moving with the shocks. Magnets look well secured as well and with a 12mm Ti shaft through the motor it should be ok.

Not done any spin up tests with the disc, as its not made but done some with it mounted on the Mill and the other side of the clutch in the head. So far never had a spin-up problem (fingers croseed) but have got the acceleration turned to slowest so far.

Not planning on a fast spinner, gone for same speed as the old one so yours probably has more energy.