The Chevron Championship Series 2 - Medium Medium Speed Ones

[joey_picus]

Entries so far:

1: Kody Kunz
-Macduff The 4th (looks slightly over 100kgs, but since the limit for tracks is 110 Ill let that slide)
-Super Gore Septua (all is well)
-Shadow Zone Forever (likewise)
-Intriguous (stats needed)

2: Paul Cuomo (total lack of battery stats for all)
-Nitro-Gene 5.0 (over described to hell, but in weight)
-Harraz (nice and in the limit)
-Autoism 3.0 - I suspect this to be overweight, I advise you make some changes to the voltage and possibly the armour
-Blast - Armour overkill here, thin the scoop and top out and you should be fine though

3: Daniel Stickler (all slightly vague on batteries but also okay for weight)
-Monsoon Magnum
-Fling
-Squish Reincarnated - Vivoil pumps need a motor to run them :P
-Maleficent

4: Richard Southworth
-Battle Raptor 5
-Double Killa (Im assuming 2) - what 24v battery and motors?
-MORD 2
-Ringwraith - again, what 36v battery and motors are you on about? :P

5: Jack Orr
-CroOKeD - no base armour? Also you havent said which MAgmotors youre using)
-Boxx
-Pick-Axe Of Doom
-Typhoon 2

6: Samuel Park (bit vague on the batteries, and less flippance with the turning circles please)
-Blue Hurricane
-Paralyzation 2 - drum is made out of?
-Mad Dash
-Ramminator Evilution

Otherweights - will check all these later but two things that stand out are Jack entering two in the ants - maximum of one please - and Sam entering Vortex. Details on Vortex please? :P

[andrewj]

Team ?¿?

http://strickenone.proboards99.com/i...ead=294Gehenna

[team_britespark]

Squish Reincarnated
Dimensions (L x W x H): 80cm x 65cm x 40cm
Shape: Boxy wedge, with angled sides and side skirts made from 5mm Titanium. The top of the machine comes to a point, thereby making it land on its side if flipped.
Colour: Black with two enormous Anime-style red eyes on each side of the weapon.
Weight: 100kg
Drive: 4 x S28-150 MagMotors running at 24v, powered by some 24v NiCad batteries.
Top Speed: About 12mph.
Wheels: 4 x 15cm diameter Titanium wheels, coated with Vulcalore for added grip.
Armour: 7mm Titanium all over, with the front wedge reinforced with a layer of 3.5mm Hardox. Base-plate is 8mm Polycarbonate.
Weaponry: Embedded in the front wedge is a crushing claw, similar to that of Sir Killalot or Crushtacean. It is made from 2cm thick Titanium and the bottom part of the jaw is designed to be flush with the front wedge. The top part of the jaw is jagged. The jaw is powered by a 80mm x 40mm hydraulic ram, which is then powered by a Vivoil pump running off a S28-400 MagMotor at 24v (batteries used are 24v NiCads) . The claw runs at 3000psi. The main premise of the weaponry is to lift and crush at the same time.
Turning Circle: 0m
Ground Clearance: 0mm at front and sides, 7mm on back.
Srimech: An arm on each side of the robot extends from the main body each time the claw/lifter is activated. Each arm is made from 1cm Polycarbonate.

[samuel3764]

Paralyzation 2s drum is made out of titanium and teeth are hardox.

Id also like to change my Featherweight entry to Little Hitter.

[steven_mcg]

I insist you save me a spot, good sir!

[paulc]

__________________________________________________ ______________________________ __________________
-2>Quote

In addition to those who have seeds, Daniel Stickler, Steve McGregor and Martijn Benschop have reserved places over MSN.
__________________________________________________ ______________________________ __________________

I think he already has reserved you a space Steven

Ive sorted out the armour on Blast, but what changes do you specifically want to Autoism, because do you wish I change the voltage on the Mag powering the claws, or on the motors.

I think the exo-skeleton is the problem with the armour, so Im thinning it down by 1mm.

Does this sound OK?

[velociraptor]

Double Killas halves have Perm 080s motors, Ringwraith has S28-400 Magmotors, and both have Nicad batteries (24V and 36V respectively).

[eene]

If I may enter, please?

Here are two heavyweights I made up just now. Feel free to point out any mistakes, and Ill work on them until they meet your expectations

The Kill Point

Weight: 97kg
Shape: An invertible box like Tornado or Storm
Dimensions: 64cm X 42cm X 9cm
Power: 4 750watt electric motors, like the ones Firestorm uses (I think...)
Speed: Around 10 or 12 mph
Wheels: 4 Storm II style wheels
Armour: Aluminium, and inside, a reinforcement made of titanium. The layers are 2mm thick
Weapon: A steel spike (If static weapons are allowed). It has sharp blades on the side of the spike
Srimech: Invertible. There are small bars on the side to stop it being propped there
Colour: Silver with hazard stripes on the side
Notes: I made this up not long ago, and it is based on a TV show I watched on Bravo. Turning circle is 0

Skullcrusher

Weight: 99kg
Shape: Cylinder
Dimensions: (Diamiter) 90cm X 15cm
Wheels: Two
Power: 2 24v Nicad batteries. 2 more power the weapon
Speed: 9mph
Weapon: Crushing jaws on the front like Sgt Bash. They are electrically powered, so probably wont be much use
Srimech: None
Notes: Turning circle 0, based on a one off character from Bottom who beat up Richie and Eddie at the end of an episode

My other heavyweights will be real, if allowed: Joker from Extreme Warriors (The RWEW Series One version, which is a silver full body spinner with Joker on the side) and Nightstalker (From RWEW Series Two: A black full body spinner with sharp blades and two menacing eyes painted on)

The Kill Point and Skullcrusher will represent Jersey, the island in the Channel Islands I live on. Since they belong to the UK, I might as well have represented the country as a whole instead. Real robots represent where they come from (In order of intro: Noble County, IN and Yuma, AZ)

Other weights will be along soon. Good luck with this, Joey. Point out any mistakes I have made, as I fear I have made loads

See you later!

[matty_haka]

Can you reserve me a spot please Joey... I have some batteries to solve

[eene]

Sorry, I forgot. Skullcrusher is made from 2mm thick titanium