w.a.r, micro tornie of death one

[team_orr]

hey hey

w.a.r is going a bit slow and i want something i can easily write to fill in the gaps between the w.a.r fights

so the rules are:

i need 6 people to enter one antweight each

150gs for rollers and 240gs for walkers/shufflers

all robots must fit in a four inch cube

clusters are not allowed to have more than 3 parts, and must together fit in the 4 inch cube and fit in the weight limit.

really's are allowed but innovation is encouraged

no liquid based weapons, entanglement weapons, flame weapons or untethered projectiles

there is no weight bonus for infer-read or other autonomous systems

the arena is the robot wars antweight arena

the round format is basically a mini annihilator with 2 robots going out in each round until there are 2 robots left, they will then fight it out to decide who will be the champion!

simple eh?

jack

[kodster]

I'll enter Flamberge. Click on Team Zlayerz on my sig to get to the stats.

[corsair_lightning]

I'll enter Spark.


Spark
Weight: 150g
Shape: Look at the picture.
Colour: Look at the picture.
Dimensions: 85mm x 105mm x 27mm
Drive: 2 micro-car motors, powered by 1 AA sized NiCad battery.
Locomotion: 2 micro-car wheels
Armour: 4mm Plasticard
Speed: 1mph
Ground Clearance: 0mm at front, 0mm at sides(the sides are part of the front, see the picture), and 0.75mm at back.
Turning Circle: 0mm
Weapons: The wedge shape.
Srimech: It's invertible
Strengths: Fairly nippy, Plasticard is tough.
Weakness: It has no active weapon.
Bio: A revamp of Lightning Spark, an Antweight from Team Lightning, Spark is ready to fight.

A picture(Like this but invertible):

[joey_picus]

I'll have Bobcat, stats on ZED.

Good luck with this mate

[team_orr]

good good, entries are coming in, keep them coming people

[corsair_lightning]

Sorry, but I need to fix Spark.

Spark
Weight: 150g
Shape: See the picture, except the robot is invertible.
Colour: See the picture.
Dimensions: 85mm x 105mm x 27mm
Drive: 2 COPAL gearmotors, powered by AA sized NiCad battery.
Locomotion: 2 micro-car wheels
Armour: 4mm Plasticard
Speed: 1mph
Ground Clearance: 0mm at front, 0.5mm at sides(the sides are part of the front, see the picture), and 0.75mm at back.
Turning Circle: 0mm
Weapons: The wedge shape.
Srimech: It's invertible
Strengths: Fairly nippy, Plasticard is tough.
Weakness: It has no active weapon.
Bio: A revamp of Lightning Spark, an Antweight from Team Lightning, Spark is ready to fight.

[team_orr]

any more?

[leorcc]

I'll enter Katjuscha.



2xSanyo drive 11.1V
65gr vertical spinner on 13000 rpm
Ti scoop 1 mm
Carbon/Kevlar top armour
Weight 148gr.

[andrewj]

I think we need some more old skool antweights. :wink:

Name: MicroForce 3.0
Weight: 150g
Shape: Low profile box with a front wedge and rounded sides and rear.
Colour: The main body is see-thru with a silver front wedge.
Length: 100mm
Width: 50mm
Height: 25mm
Motivation: There are four wheels. They are made of HDPE and are 30mm in diameter. Each wheel has a Dycem tyre bonded to it for extra grip on the arena floor.
Drive: 4x HS-55 Servos run at 6v from a NiMH battery pack.
Turning Circle: 0m using a tank style steer.
Speed: 45cm/s
Ground Clearance: 0mm on the front wedge, 2.5mm at the back and sides.
Armour: 1.5mm thick Polycarbonate monocoque with 1mm Titanium on the front wedge.
Weapon: The main form of attack comes from ramming opposing robots around the arena using the wedge shape.
SRIMECH: MicroForce 3.0 is invertible and the rounded sides, rear and wedge prevent it resting elsewhere.
Notes: Thanks to Aaron for helping me with the original design.

I hope that is okay, Jack.

[knightrous]

I'll throw in a cupcake.

Name: uMBX (Micro MBX)
Weight: 150g
Shape: Picture
Colour: Glossy White with Acid Green teeth
Length: 100mm
Width: 100mm
Height: 30mm
Drive: 2 x C2028 1400kv 90Watt Brushless motors @ 11.1v. The motors have urethane bonded to the magnet can to turn them into 30mm wheel motors.
Batteries: 300mah 11.1v Lithium Polymer battery
Speed: 100mm/s
Ground Clearance: 2mm
Armour: 2mm Titanium rim, 1mm carbon fibre base with a 1mm polycarbonate top.
Weapon: uMBX is a translational spinner, the whole robot spins at 5000rpm while pulsing the drive motors to make the robot translate/drift around the arena. 150g @ 5000rpm should pack a monster hit to any antweight. uMBX has 2x Titanium teeth welded to the rim to impact opponents with.
Notes: Invertible.

It's pretty damn close to the weight limit, but I've not the time at the moment to CAD it all out and do all the weight calculations properly. If there is anything obvious, let me know.