I will change my entries to Haldux 2.0 & Heliosa Xtreme

Name: Haldux 2.0
Colour: A flourescent green chassis and a flourescent orange flipper
Shape: M2 with a flat bit at the top ( the width of the flipper ) and side and rear skirts, plus the rear is shaped like a quarter sphere
Speed: 24MPH
Weight: 100KG
Armour: 20MM HDPE
Drive: 2 LEM170s @ 36V
Power: 7 NiCads @ 36V
Locomotion: 6 small spherical HDPE wheels with an Poly-urethane coating
Ground Clearance: 0 all round thanks to skirts
Turning Circle: 0
Size: 120X90X40
Weaponry: 1) A 30cm wide front-hinged flipper that takes up all of the middle part of the body, it is powered by a 120X140 ram, it has a 5KG Co2, which should give 30-40 flips, it operates at 750 PSI
2) A Hardox wedge extender to make the wedge 0
Srimech: Flipper

Name: Heliosa Xtreme
Shape: T shaped with the wide bit being the front, the front has a Das Bot wedge/scoop and side and rear skirts
Colour: Black, but the front and skirts have flames airbrushed on it
Speed: 27MPH
Weight: 100KG
Armour: 4MM Hardox
Drive: 2 LEM 200s @ 60V
Power: 6 NiCads @ 60V
Locomotion: 2 small half-spherical wheels with a Vulkalon treads, they are located on the wide part of the body, but inside the body, ther is also a small caster
Ground Clearance: 0 all round thanks to skirts and wedge extender, under the skirts the GC is 8MM
Turning Circle: 0
Size: 100X70X35, but the thin bit of the T is 30CM wide
Weapons: 1) A Titanium wedge extender
2) A flipping arm that is hinged at the rear of the robot, it run flush to the body, but has a small 40CM wide spatula at the front of the robot, it is powered by a 120X140 ram, which runs off 2 3.5 KG Co2 tanks
Srimech: Invertible but can right itself the arm

(Message edited by neontetra23 on October 23, 200