Hi Alex Good to have another alex on the forum

the link for the motors doesnt seem to work but i would personally go for either some drill motors (a stripped down drill basically), some speed 900s on a reduction gear ratio or some bosch 35 watt motors

you may aswell go for an xxl scorpion for the drive motors

i have a spare actuator not very fast but you could work with it

the controller for that i could also help with, and you wouldnt need a scorpion to control that

i would certainly recommend a spektrum radio set, and if you buy a speed controller witha built in battery elimating circuit BEC then you wont need the reciver pack

your £600-£800 for what your doing is a very decent budget but i would suggest trying to get the cheapest stuff still, this hobby can be money draining over a few years

i will send an email regarding the actuator and controller

also how many drive wheels are you planning on? and designs we can see?

and btw look at http://www.technobots.co.ukwww.technobots.co.uk a online robotics store based in the UK

good to have you on the forum...

Alex Team psycho fling