quote:

Hypertension Mk 3

Weight- 98.4kg
Dimensions- H- 40cm, L- 90cm, W- 70cm
Speed- 17.6mph
Shape- Wedge
Ground Clearance- 0mm at front, 3mm at sides, 4mm at rear
Turning Circle- 0
Armour- 7mm Hardox
Locomotion- 2 x 150mm drilled aluminium wheels with reinforced rubber grips + small front wheels for manouvreability.
Batteries - 20 x CP3600 Nicads at 1.2 v each making 24v and each weighing 80g
Motors- 2 x c40-300 Magmotors running at a gear ratio of 4:1 and producing a total pushing force of 7.64BHp
Failsafe Position- Under the armour at the top of the flipper.
Paint Scheme- See through
Weapons- a CO2 powered flipper running at 750psi with 2 x 70mm bore, 220mm stroke rams behind it with a 2.5kg gas tank. It can flip about 2 tonnes, though that shouldn€™t be necessary. It should send a 100kg robot about 1.7m into the air and had around 15 flips in the tank. The idea is that we reserve flips as much as possible and only use them when in prime position.
Srimech- The flipper.
Strengths- Powerful flipper, strong armour, good speed
Weaknesses- Limited manouvreability, limited CO2.

Weight Distribution

Chassis - 22kg
Armour - 35kg
Wheels - 7kg
Batteries - 1.6kg
Motors - 10.8kg
Weaponry - 12kg
Odd Bits (always estimated at 10kg)
Total - 98.4kg

Batteries need sorted here. A single 24v pack @ 3.6Amp Hour isnt going to cut it... Id advise 3 packs instead, just to make sure youll last the full battle. Therefore, you need 3 x 20 CP3600 Nicads packs, a total of 60 cells and a approx weight of 4.8KG

quote:

Storm Wars - Episode 1 - Attack of the Clones

Weight- 100.7kg
Speed- Geared down to just 12mph, with immense acceleration
Shape- Box Wedge. The wedge goes 26cm back
Dimensions- 80cm x 60cm x 32cm
Locomotion- 6 x 300mm aluminium hubs with 1.2cm thick rubber tyres
Ground Clearance- 0.1mm at the front of the wedge, rising to 4mm at the back of the box section.
Turning Circle- 0
Armour- 6mm titanium all over
Batteries- 40 x CP3600 Nicads at 1.2v weighing 80g each
Motors- 4 x PERM 132 motors running at 48V giving off a total of around 60HP
Paint Scheme- Black with assorted rude messages in the star wars rolling prologue style, changing for each fight.
Weapons- None
Srimech- invertible
Strengths- incredible torque and pushing power
Weaknesses- lack of damaging weaponry

Weight Distribution

Chassis - 10.3kg
Armour - 20.2kg
Wheels - 12kg
Batteries - 3.2kg
Motors - 45kg
Weaponry - 0kg
Odd Bits - 10kg
Total - 100.7kg

Size is a problem 3 x 300mm diameter wheels in line with each other is a minimum of 900mm in length. Youll need at least 10mm spacing between each wheel, so 930mm... Yet the robot is only 800mm long. Do the wheels hang massively past the front and back?

Batteries again. Single 40cell (48v) pack will melt when those 4 motors, they can pull up to 960amps EACH! Id advise to drop back to just two of these motors (They are etek size...), run 4 x 40 cell packs and run current limiting at 400amps. This will limit you back to a combined ~25HP peak, but the robot will actually last a match

Probably still boarder line on the weight, but Ive not the time to sit down and do everything for you