The Killer Toad Tournament Special

[andrewj]

Im always up for Spin Dash Unleashed vs. SOR X, as long as Steve agrees.

[pcbore]

Alex is right, this grudge match is needed in any self respecting line up of grudge matches. Even if they are spelt wrong. Slammer vs The 6isc is on

[steven_mcg]

Like I could turn down another SD/SOR face-off. Count me in. :wink:

[kodster]

Assuming nobody wants to join me taking down the n00bs, Ill enter Tira IV in that blank spot of mine. :P

Ill get the stats up shortly. Too lazy to do so right now. :P

[team_britespark]

Ill help ya defeat El N00bs, Ko-D.

[kodster]

w00t.

Stats, by the way:

Tira IV

Pic: http://i276.photobucket.com/albums/k...raIV-1.pngHere

[pcbore]

The 6isc

Shape: Too complicated, apparently. See picture in the vapourbot images thread.

Size: 60X110X60 CM (LWH)

Weight: ~100 KGs

Speed: 10 MPH.

Ground clearance: Under the wheel protectors, it€™s 5 mm.

Weapon: 26 KG spinning disc, powered by one LEM 130 Lynch motor and going at 2500 RPM. The disc is shaped with its own teeth rather than needing teeth surgically attached to it, so dentistry is quite impossible. The energy output is 36 KJ€™s which, while modest by vapour €˜bot standards should still be enough to make a mess of things.

Wheels: 6 wheels, but four wheel drive. This has three wheels on either side arranged in a triangular fashion, so it only runs on four at a time. The wheels are 1 CM solid Ti with soft compound rubber wrapped around them to provide shock resistance, and a layer of Vulcalon wrapped around that to provide traction.

Chassis: The main chassis consists of one solitary 1 CM thick 4 mm box section hardox bar. Slotted over that is a secondary axle, inside which are the batteries. There are also two other triangular chassis€™ supporting the wheels. These are made from 4 MM 1 CM box section Ti bars with weight reducing holes.

Armour: The true axle and chassis is a 4 MM hardox bar. The battery axle is 2 mm aluminium. The semi circular wheel protectors and side spikes are 5 mm Hardox. The disc itself is 14 MM of Hardox 500, and the outer axle is 4 mm grade 5 Ti.

Srimech: Totally invertible. Controls won€™t even have to be reversed after flipping, meaning it can just go straight back on the attack.

Drive: 2 S28-400 Magmotors at 24 volts.

Strengths: The newest version of The 6isc does away with as many weaknesses in The Disc 5 as I could find.

Weaknesses: Weak armour in places. Can€™t use axe attacks.