Right...stats.

Troubloon 6

Shape: Box wedge with inverted rear wedge.

Colour: Mainly brick red. Name on top.

Weight: 100kg

Speed: 12mph

Armour: 3.2mm Hardox monocoque, weighing in at 34kg. The side skirts are 3mm Grade 5 titanium.

Drive: 2 S28-400 MagMotors run at 24 volts.

Power: 8 A123 Li-Ion packs.

Motivation: (I was researching this but then my internet got...bad while I was talking to Aaron :P) 2WD, titanium hubs with a two-component polyurethane coating.

Ground Clearance: 0mm at the front behind the disc, 2cm under the disc, 10mm at the sides (0 with skirts), and 15mm at the rear.

Turning Circle: One that is non-existant

Dimensions in CM: 85 x 65 x 16

Weapon 1: Two 10kg horizontal titanium flywheels, a low one at the front wedge and a high one at the rear wedge, with 2 large Hardox teeth. When flipped, the high rear disc becomes the low front disc and vice-versa. Theyre powered by one S28-400 MagMotor at 36 volts and spin at 2000rpm. They take about 4.7 seconds to get there and dish out approximately 64.3kJ per hit. There is a belt in the weapon drive so that if one of the discs is stalled, the S28 will keep on spinning and the other disc will as well.

Weapon 2: Not really a weapon, but there are extended horns at the front and rear, sharpened and diamond-tipped. The horns at the rear are to spear wedges that try to race in under the rear, and the horns at the front do the same when inverted.

Srimech: Invertible.

Notes: Thanks to Aaron, Leo, and Martijn for all the help in making of this bot, and doubtless there will be more to go.

The CAD is done but I must get some sleep. night.