Cyrilium Mach 4 (Active)
Weight: 100kg
Shape: Pretty much a lower version of Warrior SKF.
Colour: Gold with a red flipper.
Dimensions: 95cm x 75cm x 20cm
Drive: 2 36v LEM-130 motors powered by 10x 36v A123 Battlepacks.
Locomotion: 2 solid vulkanized rubber wheels with aluminum boron carbide hubs.
Armour: 6.5mm titanium/vanadium alloy for everything, except for the spinning rim, which is 6mm hardox, and the flipper, which is 5.5mm titanium/vanadium alloy..
Speed: 15mph
Ground Clearance: 0mm at front, and 5mm at sides and rear.
Turning Circle: 0m
Weapon: The weapon is a powerful 37kg spinning rim with 3 1kg hardox teeth, powered by a 36v LEM-170 motor at 4000rpm. The spinning rim is an exact half-copy of the one used on the original MDU., and therefore it should put out about 100kj. However, unlike MDU, the spinning rim, via a double clutch, can transfer its kinetic energy either to the front flipper, thereby flipping an opponent a metre into the air, or to the drive, which can produce a maximum speed of 30mph with the kinetic energy boost on.
Srimech: The robot is invertible, however the flipper can self-right it if need be.
Strength: Um... Infinite flips?
Weakness: Mainly the fact that, when the drive clutch in engaged to the disc, I only have about 5 seconds of extra power before the disc slows down. I'm very vulnerable when that happens.
Bio: Cyrilium returns to the original name, but now contains a revised shape ala Son of Ripper X/Next Stop, Jupiter. With infinite flips, tough armour, and a half-duplicate of MDU's spinning rim, I've finally removed the weak armour, and several other faults.
Win/Loss Ratio: N/A
Shape: You need to describe the shape of Warrior SKF or provide a picture. It€™s not a very well known robot.

Drive: Even I can see that there are some problems with the batteries. A123 cells are 3.3v each. The closest to 36v you can get is 36.3v. Therefore you need 11 cells per pack. That€™s just about all I understand, someone else should be able to help out with the rest (and probably correct me).

Ground Clearance: The ground clearance needs to be higher, especially for a full body spinner. I would advise at least 10mm.

Weapon: I don€™t understand this €œhalf-copy of MDU€ part. This set-up is nothing like MDU at all. Have you calculated the 100kJ output or is it just a guess? I like the double-clutch idea though, although it would probably be very difficult to do. Can you explain how it would work? The one metre flip and 30mph boost are also estimates, correct? Cool idea, but I think the system to make it work could be on the heavy side.

Weakness: For once, the weakness is worth putting down. However, I assume the 5 seconds is just a complete guess?

Overall: A couple of good ideas, although I personally preferred the older Cyrilium€™s. Talking of those, Cyrilium Mach 3 and American Oil don€™t appear to have fought yet. Why upgrade them? I very roughly put the spinner through the Cosmos Calculator and my figures looked very different to yours. A couple of things need fixing.

Kody: w00t! A masterclass in battle writing, awesome.