Third channel on RS80D controller

**psycho_fling** · 6th July 2008, 21:31

cheers Woody

**psycho_fling** · 7th July 2008, 08:08

how would i go about wiring the 2 relays?

Thanks Alex

**woody** · 7th July 2008, 13:53

Sorry Alex ,
Ive read what information I can find and still havent a clue .

**leorcc** · 7th July 2008, 17:37

Are these the same relays as on the electronizes?
They do not have a center off setting do they?

**woody** · 7th July 2008, 18:41

They dont have a center off ( Neutral ) as in three seperate postions ON Neutral OFF ...No.
Do you know of any that do Leo?

**woody** · 7th July 2008, 18:52

They can as a pair be configured to give three options.
OFF OFF ( Neutral / Brake ) ... OFF ON and ON OFF.

The missing ON ON option is the same as OFF OFF

(Message edited by woody on July 07, 200

**leorcc** · 7th July 2008, 19:49

Well if the RS80D aux channel works as i think it does, Then I think I have the schematic for Alex.

**woody** · 8th July 2008, 11:05

Well if the RS80D aux channel works as i think it does...thats the prob ...Im not sure what the Aux is putting out in relay mode.

**leorcc** · 8th July 2008, 11:23

Neither did I, so i sent them an email asking them. Their answer is somwhat disturbing.

quote:

The Aux channel is not made to connect to relays. It is designed to interface to a OSMC or MC1 motor controller to control a third motor.This information I couldnt find in the manual or the website.