Register To Comment
Page 5 of 6 FirstFirst ... 3456 LastLast
Results 41 to 50 of 51

Thread: NSIREC2 Final signups

  1. #41
    Stats for Team Hell Beta

    When Love and Death Embrace

    Weight: 100kg
    Size: 80 x 70 x 20cm (each botlet)
    Weapon: Hydraulic Crushing jaws: Love has a pair of horizontal claws (Ala Kan-opener), and Death has a vertical jaw (Ala Killalots claw, with an extended flat front like that on General Carnage, Series 3).
    Both powered by 40mm bore hydraulic ram on 3000PSI, powered by a mag-motor operated pump
    Power: 2x Bosch 400 motors at 24v
    Speed: 12mph
    Drive power: 4bph
    Notes: More of a controling robot than a damager, but can still damage lesser armourment
    Turning Circle: 0cm
    Armour: 3mm titanium
    Wheel Type - 4 vulcalon treated Aluminium hubs (Ala Storm 2), but set so there are 4 wheels but set like a 2WD (2 wheels on same output)
    Strengths: Good at controlling other robots, Invertable
    Weakness: Each bot a bit on the light side
    Colour: Love: A vermillion red with a dark pink heart in the middle with Love written across on a parchment. Death: Carbon black background,
    with a gravestone with Death chiseled into it, and the reapers scythe leant against it
    Shape: basic rectangular box with angled sides

    Random Violence:
    Weight: 100kg
    Size: 70 x 70 x 30cm
    Weapon: A 1-peice High grade steel spinning shell (Cylindrical) with 3 claw shaped teeth on either side set at different heights and angled upwards.
    Being 1 peice means there is no weak welds to break. The output gear is cut into the inside, like the wheels of Tanto. The shell is spinning at 2500RPM,
    so the start up is easier to get going, Output force roughly calculated at 105Kj. The shell wall is 15mm thick, and the shell takes up half the bots weight.
    The teeth are angled up to send opponents up and away from the bot, whilst forcing RV downwards, not bouncing off uncontrollably.
    Power: 2 Bosch 400 at 24v, Weapon: Lem 130 at 36v
    Speed: 12mph
    Drive Power: 4BHP
    Notes: bearings on robots base stop the shell from going inwards.
    Turning Circle: 0m
    Armour: 15mm Steel (the shell)
    Wheel Type: 4x Wheelbarrow type (no need for great traction)
    Strengths: very tough, reliable, and very destructive
    Weakness: Once flipped, thats it
    Colour: Black and red tear graphics, name on top

    Smash and Grab:
    Weight: 100kg
    Size: 140 x 120 x 45cm
    Weapon: Pneumatic Pincers and 5kg Sledgehammer. Claws on low pressure (150PSI), Hammer on Full pressure (725PSI).
    Claws are Mild steel. Hammer knocks out about 8KJ, swings a full 180 degrees.
    Power: 2 Bosch 750 motors, 24v, 8:1 ratio (decent speed, good push, simaler power to Shunt)
    Speed: 16MPH
    Drive Power: 10BHP
    Notes: Very much Dead Metal in appearance
    Turning Circle: 0m
    Armour: a collection of steel pipe and 5mm Hardox plates in strategic places (Claw pivots, over motors, batteries, speedo, and gas tank
    Wheel Type: Go-kart x 2
    Strengths: Can put repeated blows in the same places, Hard to flip, uses hammer to self right when it does, weapon synergy
    Weakness: Armour not brill with spinners.

    Shadow:
    Weight: 100kg
    Size: 100 x 90 x 25cm
    Weapon: Brute Force and a pair of 9 hardox ramming spikes.
    Power: 2 Magmotors, 16:1 ratio, 36v, pushing power unknown at time of writing, but Ill get it to you
    Speed: 22MPH
    Drive Power: Est. 18BHP
    Notes: Satanix in HW form
    Turning Circle: 0m
    Armour: 10mm Steel in all places
    Wheel Type: Nylon, with high grip mountian bike tyre
    Strengths: Tough, speedy
    Weakness: Lack of offensive weapon
    Shape: Look on Team Hell Website for Satanix. Its that shape

  2. #42
    swiss_tony
    Guest
    Once AGAIN I get IMed while away. This is a freaking creepy trend.

    anyway, ive been surprisngly busy over the summer, so it might take me a while to get this show on the road. Ill get there though, and I shouldnt be long.

  3. #43

  4. #44
    Not to be picky, Paul, but its ZED, not VED. :P

  5. #45
    swiss_tony
    Guest
    Alright, my schedules calming down a bit, so this is gonna get booted off soon.

  6. #46
    swiss_tony
    Guest
    bah sorry

    School hasnt started yet so im 100% swamped

    Hopefully once it does Ill have more free time to get this going. Dont expect much, if anything, until then.

  7. #47
    swiss_tony
    Guest
    Bah.

    When I first started this 2 years ago, I had the time. 2 years later, I dont. Now, Im not pointing fingers at anybody for taking so long, I dont have a right to do that. But its true. I used to have the time, now I dont.

    Places elsewhere are now taking up my remaining time, one in paticular of which I am more dedicated to than FRA. Its nothing against any of you, or what you do here, but Im having more fun there and as a result have been stopping by less and less often.

    Its gotten to the point where I dont really care about vapours anymore. Im losing intrest, Im losing time. Sorry guys, its off. Looks like Ill forever remain without a tournament completed, and this marks my retirement from vapourbotting [Though ive been retired for a while ago]writing [Though Ive never really been an accomplished writer] and being a member of this forum.

    Again, nothing against any of you guys. Im just too busy elsewhere where I like doing things more. Youre all good people [Except for Tim and the fun bunch], weve been through some good and bad times, most of the bad times were my fault, Ive been a real jerk sometimes, Im sorry, forgive me, and Im still gonna be on MSN if you ever want to talk to me.

    K. Later. Over and out.

  8. #48

  9. #49
    I'd be okay with it, but if I can change my entries (if there's any point in doing so anyway :P ), I'd like to do so.

  10. #50

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •