Register To Comment
Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: Various parts for sale

  1. #1
    see http://s294.photobucket.com/albums/mm117/jamesxbotz/http://s294.photobucket.com/albums/mm117/jamesxbotz/
    for images of some of the parts below, if you are interested in anything drop me an email and make an offer. If anything dosnt get snapped up or make a reasonable reserve, Ill pop them on ebay next week, but wanted to give you guys the first choice.

    Payment by cash prefered, cheque ok, paypal ok too. Pick up prefered, can post at cost, but prefer not to unless you are willing to pay for recorded, or accept proof of postage on other methods the risk is yours. Anything bought will be posted the day after cleared payment where possible. All parts used unless stated.


    Duff Norton linear actuator, was used in Team Storm featherweight robot Force X, see http://www.teamstorm.comwww.teamstorm.com for info. This is a fantastic bit of kit, and Ill throw in the titanium axle in the pic. Serious offers please, these are £300 plus new.

    Selection of pneumatic rams, from small spring retract to a giant 100mm x 800mm beast with 1/2 BSP inlets. Make an offer.

    Mario ram, 100mm bore, full pressure, 1 BSP inlet for ball or soloniod valve. Mounted on inclined frame with integral flipper arm mount. Cost several hundred pounds, make a sensible offer. Never used

    Mario buffer 2kg ali fir extinguisher buffertank for full pressure use, built in pressure relief valve, fed via treaded inlet on base, large outlet for ram. (3/4 BSP i think) Never used.

    Hardox 650 featherweight disks. As used on team dragons robots, I have 3 of these, make me an offer if you want one, or more. Never used.

    Hardox featherweight disks, originally made for Ewan, they look pretty cool, but never used. I have 2 of them, make me an offer.

    1/2 BSP solonoid valves, 1 Alpha type, others MiMi? type. I have never used these but they could prob use a good clean before use. Make me sensible offers on single or more valves.

    Pressure relief valve, dont know much else. It says 6000psi on the body but looks like its been adjusted, but easily tested. Make offer.

    Scorpion XL, I have a single, never used unit, plus extra Fets to upgrade to XXL if you want them. £80 delivered. or £100 with extra fets.

    Polypro lengths. 10mm thick, 100mm wide, 1200mm long. Black, make an offer, Ive a dozen or so lengths in total. Cut for a project but never used.

    Lots more to come, including Whyachi featherweight drive, batts, chassis etc... if you need something, ask, I may have what you need and its all getting sold off. No freebees, no sponsorship, no ready to run bots, sorry.

    Cheers
    James
    email on profile

    (Message edited by jamesb on June 03, 200

  2. #2
    **update**
    I will take all highest offers on Wednesday, so you have a few days to bid higher if you want anything... I have recieved a lot of emails, so taking time to work through them, will reply asap***


    Duff Norton linear actuator, was used in Team Storm featherweight robot Force X, see http://www.teamstorm.comwww.teamstorm.com for info. This is a fantastic bit of kit, and Ill throw in the titanium axle in the pic. Serious offers please, these are £300 plus new.
    ***highest offer so far £70****

    Selection of pneumatic rams, from small spring retract to a giant 100mm x 800mm beast with 1/2 BSP inlets. Make an offer.
    ****no offers yet****

    Mario ram, 100mm bore, full pressure, 1 BSP inlet for ball or soloniod valve. Mounted on inclined frame with integral flipper arm mount. Cost several hundred pounds, make a sensible offer.
    ****sold****

    Mario buffer 2kg ali fir extinguisher buffertank for full pressure use, built in pressure relief valve, fed via treaded inlet on base, large outlet for ram. (3/4 BSP i think) Never used.
    ****sold****

    Hardox 650 featherweight disks. As used on team dragons robots, I have 3 of these, make me an offer if you want one, or more. Never used.
    *****1 offer £60 for all 3***

    Hardox featherweight disks, originally made for Ewan, they look pretty cool, but never used. I have 2 of them, make me an offer.
    ****no offers yet****

    1/2 BSP solonoid valves, 1 Alpha type, others MiMi? type. I have never used these but they could prob use a good clean before use. Make me sensible offers on single or more valves.
    *****sold*****

    Pressure relief valve, dont know much else. It says 6000psi on the body but looks like its been adjusted, but easily tested. Make offer.
    ****no offers yet****

    Scorpion XL, I have a single, never used unit, plus extra Fets to upgrade to XXL if you want them. £80 delivered. or £100 with extra fets.
    ****no offers yet****

    Polypro lengths. 10mm thick, 100mm wide, 1200mm long. Black, make an offer, Ive a dozen or so lengths in total. Cut for a project but never used.
    ****2 sold 12 left***

    Lots more to come, including Whyachi featherweight drive,
    ****huge interest in these, info below****

    **** 6x Team Whyachi TWR15 with wheels. No longer available from Whyachi, these are motor/gearbox and wheel ready to fit. Had offers of £70-£75 per pair,

    One pair of Team Whyachi TWR18 with wheels. No longer available from Whyachi, whese are bigger versions of the TWR15 with bigger wheels. Highest offer at the moment £150 the pair.

    Finally, Pair of Team Whyachi T-boxes, as on http://www.teamwhyachi.comwww.teamwhyachi.com but used with astroflights so you will need to pick up motors and pinions for them as Im keeping the astros. Currently has old 550 motos are stripped pinions fitted, main gears are good, with wheels. Been offered £50 so far. *****

    *** I have a Robogeddon cyberraptor chassis and drive system ready to run, as on www.robogeddon.com includes chassis, motors, wheels, gears, belts, all assembled. note.. no bodyshell, lifter or speed controllers, this is drive system only. Make a sensible offer****

    *** more items to come***
    Cheers
    James
    email on profile

    (Message edited by jamesb on June 07, 200

  3. #3
    **update**
    I will take all highest offers when I get home tommorrow evening, so you have a day to bid higher if you want anything... ***

    Selection of pneumatic rams, from small spring retract to a giant 100mm x 800mm beast with 1/2 BSP inlets. Make an offer.
    ****no offers yet****

    Hardox 650 featherweight disks. As used on team dragons robots, I have 3 of these, make me an offer if you want one, or more. Never used.
    *****offer of £75 for all 3***

    Hardox featherweight disks, originally made for Ewan, they look pretty cool, but never used. I have 2 of them, make me an offer.
    ****offer of £30 for both****


    Pressure relief valve, dont know much else. It says 6000psi on the body but looks like its been adjusted, but easily tested. Make offer.
    ****no offers yet****

    Scorpion XL, I have a single, never used unit, plus extra Fets to upgrade to XXL if you want them. £80 delivered. or £100 with extra fets.
    ****offer of £60****

    Polypro lengths. 10mm thick, 100mm wide, 1200mm long. Black, make an offer, Ive a dozen or so lengths in total. Cut for a project but never used.
    ****4 sold 10 left***


    **** 6x Team Whyachi TWR15 with wheels. No longer available from Whyachi, these are motor/gearbox and wheel ready to fit. Had offers of £70-£75 per pair,

    One pair of Team Whyachi TWR18 with wheels. No longer available from Whyachi, whese are bigger versions of the TWR15 with bigger wheels. Highest offer at the moment £150 the pair.

    Finally, Pair of Team Whyachi T-boxes, as on http://www.teamwhyachi.comwww.teamwhyachi.com but used with astroflights so you will need to pick up motors and pinions for them as Im keeping the astros. Currently has old 550 motos are stripped pinions fitted, main gears are good, with wheels. Been offered £60, provisionally sold pending confirmation. *****

    *** I have a Robogeddon cyberraptor chassis and drive system ready to run, as on http://www.robogeddon.comwww.robogeddon.com includes chassis, motors, wheels, gears, belts, all assembled. note.. no bodyshell, lifter or speed controllers, this is drive system only. offer of £200 made****

    *** more items to come***
    Cheers
    James
    email on profile

  4. #4
    **update**
    Im home so posting everything in the morning.
    Below is a current status on parts

    Selection of pneumatic rams, from small spring retract to a giant 100mm x 800mm beast with 1/2 BSP inlets. Make an offer.
    ****no offers yet****

    --------------------------------------------
    Hardox 650 featherweight disks. As used on team dragons robots, I have 3 of these, make me an offer if you want one, or more. Never used

    provisionally sold awaiting confirmation (offer via pm so please confirm receipt of my reply if you are the person who offered £75 for all 3)
    ----------------------------------------------

    Hardox featherweight disks, originally made for Ewan, they look pretty cool, but never used. I have 2 of them, make me an offer.
    sold
    ------------------------------------------------

    Pressure relief valve, dont know much else. It says 6000psi on the body but looks like its been adjusted, but easily tested. Make offer.
    sold
    -----------------------------------------------

    Scorpion XL, I have a single, never used unit, plus extra Fets to upgrade to XXL if you want them. £80 delivered. or £100 with extra fets.
    sold
    ------------------------------------------------

    Polypro lengths. 10mm thick, 100mm wide, 1200mm long. Black, make an offer, Ive a dozen or so lengths in total. Cut for a project but never used.
    ****8 sold 4 left***
    -----------------------------------------------

    **** 6x Team Whyachi TWR15 with wheels. No longer available from Whyachi, these are motor/gearbox and wheel ready to fit.
    all sold
    ------------------------------------------------

    One pair of Team Whyachi TWR18 with wheels. No longer available from Whyachi, whese are bigger versions of the TWR15 with bigger wheels.
    sold
    ------------------------------------------------

    Finally, Pair of Team Whyachi T-boxes, as on http://www.teamwhyachi.comwww.teamwhyachi.com but used with astroflights so you will need to pick up motors and pinions for them as Im keeping the astros. Currently has old 550 motos are stripped pinions fitted, main gears are good, with wheels.
    sold
    -------------------------------------------------

    I have a Robogeddon cyberraptor chassis and drive system ready to run, as on http://www.robogeddon.comwww.robogeddon.com includes chassis, motors, wheels, gears, belts, all assembled. note.. no bodyshell, lifter or speed controllers, this is drive system only. offer of £200 made

    keeping listed another week, Id like more for this.
    ------------------------------------------------

    *** more items to come***
    Cheers
    James
    email on profile

  5. #5
    update.

    just waiting on e-mails from the people who contacted me about.......

    Hardox 650 featherweight disks. As used on team dragons robots, I have 3 of these, make me an offer if you want one, or more. Never used.

    have tried contacting you but no reply, are you still wanting them as you were highest bidder at £75 for all 3.

    and

    Hardox featherweight disks, originally made for Ewan, they look pretty cool, but never used. I have 2 of them, make me an offer.

    Have recieved your email but cannot reply as address bounces, please contact again with alternate reply address, to person agreed to £50 for both.


    I will put more things for sale next week, all outstanding deliveries will be in the post Monday morning, including the 2 above if you can contact me before then. Cheers

  6. #6
    Member

    Status
    Offline
    Name
    Chris
    Robots
    Conundrum
    Location
    Nottinghamshire
    Posts
    402
    Im sill waiting for an paypal addy James.

  7. #7
    I replied with the paypal Chris, I had thought it didnt arrive when I didnt get the BCC, can you drop me an email on
    james(at)xbotz(dot)com
    Ill reply with the paypal address.

  8. #8
    chris, i still have no email from you?
    my paypal is the same as the above email address.
    cheers
    james

  9. #9
    still waiting on a few replies, I want to get these things out of here before posting more please.
    Just would like to know either way
    cheers

  10. #10
    Just a quick reminder to anyone who contacted me to buy the above, and have not yet arranged payment/delivery.

    Please email me or paypal me to confirm if you want the parts agreed on or not, or Ill assume they are no longer wanted and will readvertise them on Friday. Ill also be advertising a number of other things, including an unexpected find from my garage, of a number of aluminium Co2 fire extinguisher bottles (no valves) for use as full pressure buffertanks (and low pressure I guess) approx 2kg, different shapes, 9 of. (email offers if very keen)

    cheers
    James

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •