Mark, refresh my memory please how exactly did Flick of the Wrist and Liar 2 become seeds in one of your tourneys?
- FRA
- Forum
- Robots
- Events
- Media
- What's New?
All times are GMT. The time now is 17:26.
Mark, refresh my memory please how exactly did Flick of the Wrist and Liar 2 become seeds in one of your tourneys?
Actually Mark, Ive decided to be nice. Replace my realies with these:
Brutalis 2.0
Shape: Like Dantomkia, but lower and heavier at the front to prevent wheelying.
Weight: 100kg
Dimensions: 90 x 90 x 25
Motivation: 2 x go-kart wheels
Power: 2 x S28-400 magmotors running at 24v, 12HP
Armour: 4mm hardox on top, rear, front and sides. 4mm 7075 hi-grade aluminium base, 5mm titanium skirts.
Weaponry: 750psi front hinged flipper running off 1 x 100m ram powered by 2 x 2kg co2 bottles, can easily throw 500kg due to the armour being heavy.
Top Speed: 15mph
Ground Clearance: Effectively 0 all round due to skirts on sides and rear and wedge at front, 6mm behind them.
Turning Circle: 0
Srimech: The flipper will easily spring the robot back onto its wheels.
Colour: Black, red flipper and yellow skirts.
Strengths: Strange shape, hard to flip
Weaknesses: Flipper not extremely powerful by vapour standards.
Former Incarnations: Brutalis 1.0, Brutalis 1.5
Notes: EOTR Annihilator Champion
Systematic Shocker
Shape: Invertible box
Weight: 110kg with setups 1, 2 and 3, 100kg with setup 4
Dimensions: 80 x 100 x 30
Motivation: 2 x steel tank tracks
Power: 2 x B42-500 magmotors running at 60v, gives 60HP
Armour: 4mm hardox, skirts are 5mm titanium
Weaponry: Interchangeable:
1) 3mm hardox front scoop which can lift 200kg, powered by 1 x LEM-130 at 36v.
2) 3mm hardox horizontal spinning disc (50 x 50) powered by 1 x LEM-130 at 36v. Approx. 30Kj hit
3) 2 x 30cm long tungsten tipped hardox lifting spikes, powered by 1 x LEM-130 at 36v, can lift up and down to work both ways up.
4) The scoop from setup one, but static. This gets the weight down to 100kg and gets around any 100kg for tracks rules.
Top Speed: 15mph
Ground Clearance: Effectively 0 due to scoop and skirts, 8mm behind them
Turning Circle: 0
Srimech: Invertible
Colour: Red with the name painted on top in green.
Strengths: Interchangeable weaponry, loads of HP
Weaknesses: Tracks exposed from above.
Former Incarnations: System Shock
Henry VIII
Shape: Box, slightly arched from the side (like Ally Gator from RW3 if you don€™t get it), with sloped sides
Weight: 100kg
Dimensions: 85 x 85 x 20
Motivation: 4 x vulkalon tyres
Power: 4 x S28-400 magmotors running at 24v, 24HP
Armour: 4mm thick hardox on top and sides, 3mm hi-grade 7075 aluminium base
Weaponry: Tungsten tipped double-headed hardox axe on a rack and pinion system, powered by co2 at 750psi, can hit robots at the back and front due to it being hinged in the middle and being 60cm in length, also has a 3mm titanium static scoop at the front to get underneath other robots.
Top Speed: 20mph
Ground Clearance: Effectively 0 at front due to scoop, 8mm behind the scoop and on sides and rear
Turning Circle: 0
Srimech: The axe will easily right the robot quickly, no matter what position it is at.
Colour: Black, red axe head, name painted in red on the scoop
Strengths: Marital experience, quick Srimech, powerful weaponry
Weaknesses: Base armour is fairly weak, but it is hard to hit anyway as the Srimech is fast.
Gulp
Shape: Tank
Weight: 110kg
Dimensions: 95 x 70 x 45
Motivation: 2 x steel tank tracks
Power: 4 x S28-400 magmotors running at 24v, 24HP
Armour: 4mm hardox on all sides, 3mm titanium skirts and base, 5mm titanium top
Weaponry: Tazbot-style 360 degree turret with hardox lifting arm. The turret is spun by 1 x LEM-130 magmotor giving it reasonable effect when spun like a spinner. The arm€™s lift/crush capabilities are powered by another LEM-130 running at 36v should lift/crush with 200kg of force. I don€™t expect it to crush through hard armour, but it should be enough to stop an opponent self-righting. At the bottom of the 50cm long arm there are two tungsten tipped spikes facing in different directions.
Top Speed: 15mph
Ground Clearance: Effectively 0 all round due to skirts, 6mm behind the skirts.
Turning Circle: 0
Srimech: The arm can right the robot in any direction due to it being turret mounted.
Colour: Camouflage
Strengths: 360 degree weapon/self-righting, multiple attack methods with one weapon (flip/crush/spin)
Weaknesses: Weak base armour and fairly weak top armour
Beta-Rex
Shape: Reverse wedge with rounded sides
Weight: 100kg
Dimensions: 95 x 90 x 35
Motivation: 2 x go-kart wheels
Power: 2 x B42-500s running at 60v, provides 60HP
Armour: 6mm titanium flipper, 4mm hardox front, sides and top, 4mm hi-grade 7075 aluminium base
Weaponry: 1000psi nitrogen flipper with 1 x 100mm ram, 2 x 3kg bottles provide the power. The flipper is T-Minus style, but the arm goes down the wedge allowing it to act as a front hinged flipper from the rear. 1600kg of flipping force!
Top Speed: 25mph
Ground Clearance: Effectively 0 at front and back (flipper and wedge), 8mm on the sides behind the 5mm titanium skirts which make it effectively 0
Turning Circle: 0
Srimech: The flipper can perform a 540 degree spin, and the sides are rounded to prevent beaching
Colour: Gold
Notes: €œMWA-HA-HA-HA-HA!€ written on the bottom- one more HA than there was on Alpha-Rex
Strengths: Lots of HP, powerful flipper, can flip from front and rear
Weaknesses: Base armour could be stronger
Former Incarnations: Alpha-Rex
Marwolaeth
Shape: Invertible box
Weight: 110kg
Dimensions: 80 x 100 x 20
Motivation: 2 x shuffle pads
Power: 2 x S28-400 magmotors running at 24v, 12HP
Armour: 6mm titanium top and base, 5mm titanium skirts, 4mm hardox sides.
Weaponry: 50 x 50 3mm hardox horizontal spinning disc powered by 2 x LEM-130s at 36v, can get up to 1500rpm in 3 seconds. 2 large serrated blades placed adjacent to each other are to rip. When at top speed can deliver a 97.5Kj hit.
Top Speed: 10mph
Ground Clearance: Effectively 0 at sides and rear due to skirts, 6mm at front and behind skirts
Turning Circle: 0
Srimech: Invertible
Colour: Red
Strengths: Powerful weaponry
Weaknesses: Weak-ish top and base armour
Hatchet
Shape: Invertible box with stiff tail
Weight: 100kg
Dimensions: 60 x 60 x 20
Motivation: 2 x go-kart wheels
Power: 2 x B42-500s at 60v, provides 60HP
Armour: 5mm hardox
Weaponry: 4mm hardox front scoop, 50cm long 3cm wide hardox tail with two tungsten tipped spikes facing in opposite directions (T shaped), when the robot spins this can deliver a 65Kj blow.
Top Speed: 25mph
Ground Clearance: Effectively 0 at front due to scoop, 8mm behind and everywhere else
Turning Circle: 0
Srimech: Invertible
Colour: Gold with name painted in red on top
Strengths: Lots of HP, strong armour
Weaknesses: Can only spin on the spot
And LockJaw.
Take care with this Mark, and you could turn yourself around.
...Yeah, change my squad as well:
Flirty Skirty
Stealth
Abaddon
Gabriel II
Nidhogg
Quaestor
147
Phoenix Down
Martijn,
Liar 2 is seeded 6th because it faced, and lost, to Behemoth, eventual 2nd seed, in the heat final.
Flick of the Wrist is seeded 4th, because it lost to 3rd place winner Quantum.
can someone adopt envy in their robots list please as i dont have any vapour bots and i want envy to fight
Shane, why not enter Envy, Hells Teeth, and Trax along with other realies?
I will! Replace Hatchet with Envy
Unless Shane wants to do what Mark just said
Mark, could you do an entries list please?
(Message edited by Robot_Warrior on May 03, 200
thanks liam i hope envy does well for you. remember envy is a very responsive, easy robot and drive it right you will win.
i want someone to adopt envy cos i dont get to play in all the fan fic events and this way envy will hopefully get to fight. i like your events and make for an interesting read.
Thanks! I like Envy, its like the modern Firestorm (but better!)
Posting Permissions
Reply With Quote
Bookmarks