Eye Of The Robot - All Stars

[paulc]

List Of Entries

1- Joey McConnell (Pontefract)
a. Phoenix Down
b. Nidhogg
c. No Objections
d. Gabriel II
2- Kody Kunz (Toronto, Canada)
a. Wedginator 6.0
b. Super Gore Evo
c. Tira 3
d. Intriguing
3- Christopher Mason (Onehouse, Suffolk)
a. Orka MK.4
b. Die-Ceratops ReInvertus
c. Leprosy Infection
d. Axe-O-Lotl
4- Martijn Benschop (Enschede, the Netherlands)
a. Sheer Heart Attack 2
b. Flick Of The Wrist
c. Back To Rock III
d. Axe To Fall 2
5- ???
a. ???
b. ???
c. ???
d. ???
6- ???
a. ???
b. ???
c. ???
d. ???
7- ???
a. ???
b. ???
c. ???
d. ???
8- ???
a. ???
b. ???
c. ???
d. ???

This is the current list, so everyone knows hows entered, and I need 4 more.

[alex_holt]

I take it you mean fight wins rather than tournament wins, lol.

Anyway:

Achilles
Black Panther
Tengu
Slammer III

http://www.alexjholt.tkwww.alexjholt.tk

[paulc]

Sorry Alex, but I think that Slammer III retired years ago, and youre now on Slammer V. Do you mean Salamander III, or am I wrong?

[pcbore]

I dont keep fight records, so Ill put in some safe entries.

The 6isc

Shape: Too complicated, apparently. See picture in the vapourbot images thread.

Size: 60X110X60 CM (LWH)

Weight: ~100 KGs

Speed: 10 MPH.

Ground clearance: Under the wheel protectors, it€™s 5 mm.

Weapon: 26 KG spinning disc, powered by one LEM 130 Lynch motor and going at 2500 RPM. The disc is shaped with its own teeth rather than needing teeth surgically attached to it, so dentistry is quite impossible. The energy output is 36 KJ€™s which, while modest by vapour €˜bot standards should still be enough to make a mess of things.

Wheels: 6 wheels, but four wheel drive. This has three wheels on either side arranged in a triangular fashion, so it only runs on four at a time. The wheels are 1 CM solid Ti with soft compound rubber wrapped around them to provide shock resistance, and a layer of Vulcalon wrapped around that to provide traction.

Chassis: The main chassis consists of one solitary 1 CM thick 4 mm box section hardox bar. Slotted over that is a secondary axle, inside which are the batteries. There are also two other triangular chassis€™ supporting the wheels. These are made from 4 MM 1 CM box section Ti bars with weight reducing holes.

Armour: The true axle and chassis is a 4 MM hardox bar. The battery axle is 2 mm aluminium. The semi circular wheel protectors and side spikes are 5 mm Hardox. The disc itself is 14 MM of Hardox 500, and the outer axle is 4 mm grade 5 Ti.

Srimech: Totally invertible. Controls won€™t even have to be reversed after flipping, meaning it can just go straight back on the attack.

Drive: 2 S28-400 Magmotors at 24 volts.

Strengths: The newest version of The 6isc does away with as many weaknesses in The Disc 5 as I could find.

Weaknesses: Weak armour in places. Can€™t use axe attacks.

Qualifications: Won a VFT tourney (I forget which exactly) and is a regular-ish semi-finalist.

Tempest Evil-est-oution

Shape: Ring spinner.

Speed: 12 MPH.

Dimensions(dh): 80CM X 25 CM

Armour: The spinning ring is 1.8 CMs of Ti. The base and top are 1.5 CMs of polycarb, giving a total armour weight of around 63 KGs.

GC: 1 CM.

Weapon: Ring spinner powered by two Lem 130s and spinning at 1000 RPM to deliver 83 KJs per hit. The four hardox teeth are 10 CMs long with two being placed near the top and two near the bottom.

Drive: 2 wheeled, driven by S28-400 magmotors.

Srimech: Invertible.

Notes: Has an absolute buttload of shock proofing inside. Everything is firmly bolted down, with layers of rubber between everything. Added to that, the teeth have a backwards curving shape which maximises the distance it will throw itself away from the opponent. The reason is twofold. First is to make ramming and flipping it difficult, but the main reason is to bleed away kinetic energy backlash, by using that backlash to move the robot externally rather than internally.

Strengths: Hits hard and is hard to hit. Not much is getting through the armour.

Weaknesses: Should the spinner fail, it€™s pretty much screwed.

Qualifications: Won an AJ Wars, vapourbot grand championships and is also a regular-ish semifinalist.

ISDSFA

Shape: Similar to Behemoth.

Speed: 15 MPH.

Dimensions(lwh): 70CM X 60 CM X 40 CM

Armour: 3.5 mm hardox, reinforced to 5 mm around the wheels. Scoop is made of 5 mm hardox.

GC: 0 mm at front, 1 CM everywhere else covered with 3 mm ti side skirts.

Weapon 1: Electric scoop, powered by linear actuators. Should be able to lift around 250 KGs.

Weapon 2: Small flywheel, giving around 8 KJs per hit. This is hidden behind the scoop. Once a robot is raised, this is extended to strike the base of the victim, with the aim of attacking wheels.

Drive: 4 wheels, driven by Lem 130s.

Srimech: The scoop, and Behemoth style side arms.

Strengths: Good pushing power and able to attack a robots drive directly.

Weaknesses: Spinner pretty much useless against armour.

Qualifications: Has been around forever, first as Soz Disc-connected then as IDSFA when I got a good connections and that joke didnt work any more... Must have won at least 5 fights, especially seeing it made it to a semi final.

The May Tracks Has You

Shape: Like Comengetorix. It has a wedge extender to give it 0 mm at the front.

Speed: 20 MPH.

Dimensions(lwh A): 85CM X 45 CM X 24 CM

Armour: 4.5 MM hardox.

GC: 0 mm at the front, 6 mm everywhere else, covered by skirts made of 3 mm Ti.

Weapon 1: Rear hinged flipper, powered by two pneumatic rams at 500 psi.

Weapon 2: Upward facing spikes on the wedge. A robot can go over them, but if it tries to reverse, say goodbye to your tyres. By wedging a robot then reversing suddenly, TMTHY can impale the tyres, then fire the flipper to do loads of damage. Even a robot with stuffed tyres will be limping after that.

Drive: Inner tracks, powered by Lem-130€™s at 24 volts.

Srimech: The flipper.

Strengths: Weapon synergy. Once The May Tracks Has You, there is no escape.

Weaknesses: Axe/flipper combos could take the tracks out.

Qualifications: Two times winner of Daves name changing series.

[steven_mcg]

1. Wedge Devolution
SHAPE- low wedge with sloped rear
COLOUR- sleek and shiny silver
WEIGHT- about 100kg
DIMENSIONS- 90cm X 75cm X 30cm
SPEED- 16mph
TURNING CIRCLE- 0
GROUND CLEARANCE- 0mm at the front, 7mm for the rest of the robot. Fitted with Biohazard-style skirts on sides and rear, giving 0mm
ARMOUR- 4mm Hardox
WHEELS- inside robot, 4-wheel drive
POWER- 2 X LEM-130s; 2 x 12v 3amp NiCad packs, giving 36v @ 12amp
WEAPONS- As usual, the main weapon is a rear-hinged flipper. This is very similar to Chaos 2, except the blade at the bottom is bent ala Bigger Brother, allowing the flipper to have greater effect against bots with skirts or low centres of gravity. The flipper itself is powered by 2 X 80mm high pressure pneumatic rams, each running at 250psi. This should allow Wedge Devo to comfortably flip up to 1 tonne.
SRIMECH- The flipper can right the machine easily and the rear wedge should hopefully prevent a Chaos-style self-flip. Also, Wedge Devo is equipped with a grey semi-sphere on either side of robot to prevent it getting stuck on its side
NOTES- flashing red light on top of robot, flies Scotland flag
STRENGTHS- powerful flipper, fast, manoeuvrable, difficult to get underneath, tough armour, good traction
WEAKNESSES- could prove a bit tricky to control, limited CO2 (like all other flippers :P)

2. Killotine: EVO
SHAPE- compact box-wedge ala Storm 2, rounded back
COLOUR- red
WEIGHT- about 100kg
DIMENSIONS- 100cm X 70cm X 35cm
SPEED- 16mph
TURNING CIRCLE- 0m
GROUND CLEARANCE- virtually 0mm at the front with spatula, 10mm at sides and back. Skirts at sides and back produce 0mm.
ARMOUR- 3.25mm Hardox
WHEELS- inside robot, 4WD
POWER- 2 X LEM-130s; 2 x 12v 3amp NiCad packs, giving 36v @ 12amp
WEAPONS- The main weapon is the large pneumatic axe, composed of 3.5mm hardox. It is very similar to that of Killerhurtz and operates with a rack-and-pinion system like Terrorhurtz. Running on 160psi, the axe runs off an 80mm X 20mm ram and stores its gas in a 2kg main bottle and 1kg buffertank. If anything goes wrong with the axe, Killotine can use its great pushing power to simply ram its opponents to death.
SRIMECH- The axe. Even if it€™s already been fired while flipped, the axe can right itself ala Killerhurtz. Also, just like the original Killotine, the machine has a rounded back and a red semi-sphere on either side of robot to stop it getting beached.
NOTES- flies the Scotland flag, thanks to Tom, Aaron & AJ for helping with the design
STRENGTHS- Fast, dangerous weapon, good amount of traction, difficult to get under, quick srimech, nice and fast
WEAKNESSES- so-so turning, limited gas supply

3. Whirligig 4.5
SHAPE- flat disc
COLOUR- gold with Mauler-style scary face on top. The face shows the direction of the robot.
WEIGHT- about 100kg (see bottom)
DIMENSIONS- 101.6cm diameter X 12.7cm
SPEED- 15mph
TURNING CIRCLE- 0
GROUND CLEARANCE- 8mm
ARMOUR- 1.905 cm thick Grade 5 titanium
FEET- inside robot, uses 4 DrillZilla-style shuffling plates. These help prevent the bot being flung halfway across the ring on contact with another bot, ala Typhoon
POWER- 2 X S28-400s running on 36v. Uses 120 X NiCad cells at 36v, producing 12amps at 36v overall for drive and weapon power
WEAPONS- The main weapon on Whirligig is the spinning outer ring, fitted with 9 x Pussycat-style claws. The spinner is powered by an LEM-130 running at 36v. It can reach speeds of 1000rpm and produce up to 100kJ...more than enough to kill another bot at full speed.
As well as this, the power in the shuffling feet mean that Whirly can act as a pretty powerful pusher if the shell fails to work
SRIMECH- the robot is invertible and the blades prevent Whirly landing on his side
NOTES- flies Scotland flag, thanks to AJ, my first properly calculated machine
STRENGTHS- fast, manoeuvrable, very deadly weaponry, tough armour, scary face shows its direction, very good traction, cant be flung away on impact as easily as Typhoon
WEAKNESSES- so-so manoeuvrability, feet may prove vulnerable to crushers and axes

WEIGHT CHECK:
armour = 33.72kg (inc blades)
chassis, mounts, bracing etc = about 30kg
drive and weapon motors = 12kg overall
NiCads = about 15kg
feet = about 10kg overall

TOTAL WEIGHT = 100.72kg. Fits right into the roller limit, with the 1% error margin rule. Probably.

http://img137.imageshack.us/img137/1297/whirligig45xt7.pnghttp://img137.imageshack.us/img137/1...ligig45xt7.png

4. E Clawdius Unum
SHAPE- skirted wedge with small box section and rounded back
COLOUR- deep green with red shield emblazoned on the wedge, depicting a gold lion with a crown
WEIGHT- about 100kg
DIMENSIONS- 95cm X 70cm X 40cm
SPEED- 14mph
TURNING CIRCLE- 0m
GROUND CLEARANCE- virtually 0mm at the front, 0mm at sides and rear thanks to skirts (arranged in a Biohazard fashion, corner-to-corner), 10mm without
ARMOUR- 4mm Hardox
WHEELS- inside robot, 4-wheel drive
POWER- 2 X S28-400 MagMotors
WEAPONS- The main weapon, as ever, is the hydraulic diamond-tipped crushing claw. It is powered by a Vivoil pump with an 80mm x 40mm ram, with a 2kg tank for storing the hydraulics. The claw runs at 3000psi and, aided by the diamond tip, should be able to leave plenty of holes in another robot.
The front wedge also features a Firestorm-style blade and two flat spears to aid in getting under the opposition. The wedge itself is now home to several Mute-style barbs to help ensnare other robots.
SRIMECH- A forward-hinged pneumatic arm on either side, powered by a pair of linear actuators. The rounded rear also prevents the robot getting beached.
NOTES- flies the Scotland flag, thanks to AJ, et tu, Brute? written on the underbelly
STRENGTHS- Quite nippy, good traction, powerful weapon, difficult to get underneath, fairly quick srimech
WEAKNESSES- so-so manoeuvrability

http://img137.imageshack.us/img137/1801/eclawdiusunumor1.pnghttp://img137.imageshack.us/img137/1...iusunumor1.png

[paulc]

Im still not sure if Alex meant Slammer or Salamander, but I DO know that 1 more spot is avaliable for the competition, and that can only go to 1 vapourboteer...

List Of Entries

1- Joey McConnell (Pontefract)
a. Phoenix Down
b. Nidhogg
c. No Objections
d. Gabriel II
2- Kody Kunz (Toronto, Canada)
a. Wedginator 6.0
b. Super Gore Evo
c. Tira 3
d. Intriguing
3- Christopher Mason (Onehouse, Suffolk)
a. Orka MK.4
b. Die-Ceratops ReInvertus
c. Leprosy Infection
d. Axe-O-Lotl
4- Martijn Benschop (Enschede, the Netherlands)
a. Sheer Heart Attack 2
b. Flick Of The Wrist
c. Back To Rock III
d. Axe To Fall
5- Alex Holt (Leicester)
a. Achilles
b. Black Panther
c. Tengu VII
d. Salamander III/Slammer V
6- Frank Goacher (Gainsborough)
a. The 6isc
b. Tempest Evil-est-oution
c. ISDSFA
d. The May Tracks Has You
7- Steven McGregor (Glasgow, Scotland)
a. Wedge Devolution
b. Killotine: EVO
c. Whirligig 4.5
d. E Clawdius Unum
8- ???
a. ???
b. ???
c. ???
d. ???
Only 1 can claim that last spot. Who will it be?

[alex_holt]

Oops... I wasnt decided which it was going to be, lol, obviously I wasnt quite decided. Ill go with Salamander though.

[andrewj]

I think these should qualify€¦

http://teamcode14.proboards24.com/in...play&thread=18

[paulc]

We have a full list of robots! LET ME HEAR YOU SAY YAY! Here are the All-Star robots, willing to risk their bolts and motors and armour to become the E.O.T.R All-Star king!

List Of Entries

1- Joey McConnell (Pontefract)
a. Phoenix Down
b. Nidhogg
c. No Objections
d. Gabriel II
2- Kody Kunz (Toronto, Canada)
a. Wedginator 6.0
b. Super Gore Evo
c. Tira 3
d. Intriguing
3- Christopher Mason (Onehouse, Suffolk)
a. Orka MK.4
b. Die-Ceratops ReInvertus
c. Leprosy Infection
d. Axe-O-Lotl
4- Martijn Benschop (Enschede, the Netherlands)
a. Sheer Heart Attack 2
b. Flick Of The Wrist
c. Back To Rock III
d. Axe To Fall
5- Alex Holt (Leicester)
a. Achilles
b. Black Panther
c. Tengu VII
d. Salamander III
6- Frank Goacher (Gainsborough)
a. The 6isc
b. Tempest Evil-est-oution
c. ISDSFA
d. The May Tracks Has You
7- Steven McGregor (Glasgow, Scotland)
a. Wedge Devolution
b. Killotine: EVO
c. Whirligig 4.5
d. E Clawdius Unum
8- AJ (Bourne, Lincolnshire)
a. SOR X
b. PsycloniZer
c. Wedga€™s Revenge
d. Exertion

When I had the 7 entries, I arranged the line-up so it wouldnt take so long, and here are the first round draws:

Draw:

ROUND ONE:
Wedge Devolution vs. The May Tracks Has You vs. Wedginator 6.0 vs. Wedga€™s Revenge
ISDSFA vs. Achilles vs. Axe To Fall vs. Axe-O-Lotl
Tempest Evil-est-oution vs. Tira 3 vs. Back To Rock III vs. SOR X
PsycloniZer vs. Killotine: EVO vs. Tengu VII vs. Gabriel II
Super Gore Evo vs. Exertion vs. Orka MK.4 vs. Back Panther
Leprosy Infection vs. Whirligig 4.5 vs. No Objections vs. The 6isc
Intriguing vs. Nidhogg vs. E Clawdius Enum vs. Flick Of The Wrist
Salamander III vs. Die-Ceratops ReInvertus vs. Sheer Heart Attack 2 vs. Pheonix Down

Send in tactics, predictions and an extra welder to make the award

[kodster]

Whoa...

EYE OF THE ROBOT ALL-STARS
ROUND 1

Wedge Devolution vs. The May Tracks Has You vs. Wedginator 6.0 vs. Wedga€™s Revenge

This was so intentional its not even funny...okay it is. Steve, AJ, shall we gang up on May Tracks? After that, go for anyone nearest.

ISDSFA vs. Achilles vs. Axe To Fall vs. Axe-O-Lotl

Probably Achilles and Axe to Fall, but ISDSFA could make it through.

Tempest Evil-est-oution vs. Tira III vs. Back To Rock III vs. SoR X

I request a team-up with AJ: Ill take out Back to Rock, you handle that horrid Tempest Evil-est-oution, Mr. Jackson. I should be able to destroy Back to Rocks lifter before I get flipped. And even then SoR can right me... please AJ?

PsycloniZer vs. Killotine: EVO vs. Tengu VII vs. Gabriel II

Say goodbye Gabriel...and possibly Killotine out too.

Super Gore Evo vs. Exertion vs. Orka MK.4 vs. Black Panther

Nother team up with AJ. Go for Orkas front end and crunch it up.

Leprosy Infection vs. Whirligig 4.5 vs. No Objections vs. The 6isc

No Objections out, and possibly Whirligig 4.5 to join him.

Intriguing vs. Nidhogg vs. E Clawdius Enum vs. Flick Of The Wrist

Go for Flick of the Wrist, see if I can take out those lovely wheels. After that, turn my attentions to E Clawdius Unum, I seem to have a personal grudge with Clawdius...

Salamander III vs. Die-Ceratops Re-Invertus vs. Sheer Heart Attack 2 vs. Phoenix Down

Wow, the C&B champs again in the same fight. Chris has some really bad draws here...but maybe he can pull it off if he teams up with Phoenix Down.

Lookin sharp, mate! :wink: