The Fight against House Robots Revisited

[dinowarrior]

Tempting as it would be to enter the already green Die-Ceratops Re-Invertus or Leprosy Infection, I thought Id use one of my lesser used machines.

MEGA MASHER 2

Weight: 100 kilos
Body Shape: Minion with skirts.
Speed: 12mph
TC: 0
GC; 0 at front, 1mm at sides due to skirts, 10mm underneath.
Wheels; 4 inner.
Armour: A nice 3.25mm Hardox
Power: 3x 12v batteries, plus Bosch 750s at 36v.
Colour: Red and yellow.
Weapons; The front is a wedge, and the back has a nasty vertical disc, powered by its own LEM130 motor and spinning at 2000 rpm. It can probably flip as well as damage. A side Minion style bar, pneumatic CO2 powered, comes out from the side.
Srimech: The aforementioned bar rights the robot, even though it can run inverted.
Inspiration; This is probably the only robot I have where I have had no inspiration. It just came as a good name.
Strengths: Power, weaponary
Weaknessess: A little bulky, not as heavy as the body would suggest.

[joey_picus]

For fun and immense bizarreness, Ill bring out the Paramagnetic LOX Box:

WEIGHT: 100kgs
DIMENSIONS: 95 x 95 x 35 cm
SHAPE: A hexagon with wedges on all sides, like Turtle Road Kill with two fewer sides.
COLOUR: Bright white, decorated with various warning triangles, symbols and signs in various flourescent colours.
DRIVE: 6 S28-400 Magmotors running from 6 NiMh battlepacks, each driving a machined aluminium cylinder with a urethane rubber screw thread on it, very similar to Alex Holts drive system on Blizzard. The screws are located inside the shell parallel to the armour plates, and using various combinations of rotation make the robot completely omnidirectional - only with a LOT more traction than if omniwheels were used. It can also spin in place to turn, but the design means it shouldnt need to that much.
SPEED: 12mph max
GROUND CLEARANCE: 10mm, but all sides have hinged skirts making it 0.
ARMOUR: 4mm Hardox on all six wedges, with the top being 10mm carbon fibre/polypropylene honeycomb material and the baseplate 5mm aluminium.
WEAPONS: None as such
SRIMECH: A linear actuator driven bar in the top of the robot, that self rights it in about 2 seconds.
NOTES: Components inside are shock mounted for protection against things. Has a large orange flashing hazard light on the top. Dont ask about the name.
STRENGTHS: HUGE traction, uniqueish, good pusher and omnidirectional - in fact, it works best without turning around.
WEAKNESSES: Lack of weaponry, so-so armour

And do we give tactics for our house robots as well?

[paulc]

Nitro-Gene 4.0 is here to show House Robots that just becuase you havent got original designs doesnt mean you go down without a fight:

NITRO-GENE 4.0

€ WEIGHT: 100kg

€ ARMOUR: 5mm Hardox for the body. 6mm Hardox flipper. Inside the body, there€™s 1cm of Vulkanised rubber on the sides and rear, with 2cm on the front to help fight powerful spinners

€ SHAPE: Low invertible box with pointed sides and rear. At the front is a 42* wedge to aid in getting underneath other robots. All the lines have been curved over to make it harder for a spinner to grab onto a panel and rip.

€ MOTORS: 4 x LEM 130€™s at 36V = 36HP

€ LOCOMOTION: 4 Vulkanised Wheels.

€ DIMENSIONS: (L) 90CM (H) 17CM (W) 70CM

€ COLOUR: Black all over with the flipper coloured red.

€ WEAPONRY: A full pressure Nitrogen powered flipper at 1000psi, using a single 80mm ram at 1000psi. The flipper is mounted in the middle of the robot, and is 20cm wide and runs 30cm up the body. Using a 3cm long Titanium strip underneath the flipper, and a heavy flipping arm, the flipper runs completely along the ground. Running on a ratio 2.2:1, the flipper produces 1600kg of force at the tips, allowing me to launch anyone away! This version has 2 x 3kg Nitrogen bottles, giving me 25 flips!

€ SPEED: 22mph

€ GROUND CLEARANCE: 0MM-2CM. At the front, it is completely 0mm. On the sides/rear, its 2cm. The orginal weakness of Nitro-Gene (its high ground clearance) has been seen to by the skirts on the sides/rear. They are 5mm Titanium skirts and are joined together like BioHazard - at the corners. To avoid them breaking off, they are held in place by Hardox hinges.

€ STRENGTH: Pushing power and weaponry.

€ WEAKNESS: High speed may mean difficult driving

[kodster]

Heavy housies call for big lifters.

http://strickenone.proboards99.com/i...play&thread=19

[paulc]

-2>Quote:
Heavy housies call for big lifters.
__________________________________________________ ______________________________ __

Why do you think I called up Nitro-Gene?

[pcbore]

Sakura

Shape: Shaped like a closed cherry blossom, sort of conical.

Speed: 12 MPH

Dimensions(dh): 90X30 - diameter taken from the widest part of the machine, it gets narrower as it goes up.

Colour: Let€™s just say it€™s a shade Bex would approve of

GC: 1 CM

Turning circle: 0

Weapon: Team Bored€™s first true FBS clocks in with a 50 KG FBS shell, spinning at 1500 RPM and powered by two LEM 130s on 36 volts, which should give a nice fast spin up time. There are four hardox teeth, painted and shaped to look like leaves. These are razor sharp to give a nice slice, and they€™re also barbed to catch and rip opponents. I can only estimate the power output due to the shape not being supported by the energy calculator. This clocks in between 90-100 KJs.

Weapon 2: Humiliation. Who wants to admit they just got beat up by a flower?

Armour: 8 mm hardox for the spinning shell, 5 mm Polypropylene for the base.

Drive: 4 wheel drive, powered by two S28-400 Magmotors on 24 volts.

Srimech: There€™s a hole at the very top of the cone, out of which a blunt self righting spike can come up. This is powered by low pressure pneumatics. Due to weight constraints, it can probably only self right about ten times.

Features: Near the top of the cone are holes. These aren€™t just for reducing weight, as each hole leads to a small aluminium box which is full of pink confetti. As the shell spins, this should be strewn out, allowing Sakura to fight in a cloud of cherry blossoms.

[corsair_lightning]

Gimme Armory.

Stats in the How Can I Improve... Thread.