If I put my name down to enter, will one of the reserved robots lose their spot? If so, then my entrant will be...

Nitro-Gene 4.0

€ WEIGHT: 100kg

€ ARMOUR: 5mm Hardox for the body. 6mm Hardox flipper.

€ SHAPE: Low invertible box with pointed sides and rear. At the front is a 42* wedge to aid in getting underneath other robots. All the lines have been curved over to make it harder for a spinner to grab onto a panel and rip.

€ MOTORS: 4 x LEM 130€™s at 36V = 36HP

€ LOCOMOTION: 4 Vulkanised Wheels.

€ DIMENSIONS: (L) 90CM (H) 17CM (W) 70CM

€ COLOUR: Black all over with the flipper coloured red.

€ WEAPONRY: A full pressure Nitrogen powered flipper at 1000psi, using a single 80mm ram at 1000psi. The flipper is mounted in the middle of the robot, and is 20cm wide and runs 30cm up the body. Using a 3cm long Titanium strip underneath the flipper, and a heavy flipping arm, the flipper runs completely along the ground. Running on a ratio 2.2:1, the flipper produces 1600kg of force at the tips, allowing me to launch anyone away! This version has 2 x 3kg Nitrogen bottles, giving me 25 flips!

€ SPEED: 22mph

€ GROUND CLEARANCE: 0MM-2CM. At the front, it is completely 0mm. On the sides/rear, its 2cm. The orginal weakness of Nitro-Gene (its high ground clearance) has been seen to by the skirts on the sides/rear. They are 5mm Titanium skirts and are joined together like BioHazard - at the corners. To avoid them breaking off, they are held in place by Hardox hinges.

€ STRENGTH: Pushing power and weaponry.

€ WEAKNESS: High speed may mean difficult driving