Register To Comment
Page 2 of 13 FirstFirst 123412 ... LastLast
Results 11 to 20 of 123

Thread: AJWars: Another Era

  1. #11

  2. #12
    If I put my name down to enter, will one of the reserved robots lose their spot? If so, then my entrant will be...

    Nitro-Gene 4.0

    € WEIGHT: 100kg

    € ARMOUR: 5mm Hardox for the body. 6mm Hardox flipper.

    € SHAPE: Low invertible box with pointed sides and rear. At the front is a 42* wedge to aid in getting underneath other robots. All the lines have been curved over to make it harder for a spinner to grab onto a panel and rip.

    € MOTORS: 4 x LEM 130€™s at 36V = 36HP

    € LOCOMOTION: 4 Vulkanised Wheels.

    € DIMENSIONS: (L) 90CM (H) 17CM (W) 70CM

    € COLOUR: Black all over with the flipper coloured red.

    € WEAPONRY: A full pressure Nitrogen powered flipper at 1000psi, using a single 80mm ram at 1000psi. The flipper is mounted in the middle of the robot, and is 20cm wide and runs 30cm up the body. Using a 3cm long Titanium strip underneath the flipper, and a heavy flipping arm, the flipper runs completely along the ground. Running on a ratio 2.2:1, the flipper produces 1600kg of force at the tips, allowing me to launch anyone away! This version has 2 x 3kg Nitrogen bottles, giving me 25 flips!

    € SPEED: 22mph

    € GROUND CLEARANCE: 0MM-2CM. At the front, it is completely 0mm. On the sides/rear, its 2cm. The orginal weakness of Nitro-Gene (its high ground clearance) has been seen to by the skirts on the sides/rear. They are 5mm Titanium skirts and are joined together like BioHazard - at the corners. To avoid them breaking off, they are held in place by Hardox hinges.

    € STRENGTH: Pushing power and weaponry.

    € WEAKNESS: High speed may mean difficult driving

  3. #13

  4. #14
    Mark, its AJ tournament. Leave it alone.

    I think you should leave.

  5. #15
    According to him, I entered twice :P

  6. #16

  7. #17
    MARK! THIS IS AJS TOURNAMENT! STOP HI-JACKING IT!

    God damnit, stop taking the p!** out of everyone

  8. #18

  9. #19
    I think I said full pressure somewhere, but its whatever is the highest you can go with CO2 - might be 750psi, but Im not exactly fully with it at the moment so correct me if Im wrong :P

  10. #20
    I think its 900psi or something like that. It cant go at 1000psi, though...

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •