Register To Comment
Page 155 of 169 FirstFirst ... 55105145153154155156157165 ... LastLast
Results 1,541 to 1,550 of 1682

Thread: How Could I Improve...

  1. #1541
    *looks at it*

    I assume you want me to check it as well?

  2. #1542
    Guest
    ...ffffff>-2>yes

  3. #1543
    :P

    Nothing wrong with it, although you might have to explain the arches further.

  4. #1544
    Given Tri-Tainiums awful performance in its past tournuments, I was thinking of improvements I could make to stop it from being so bad.

    Maybe Kody might like to do a render of this...along with some of the other renders I asked if he would do :wink:

    TRI-TAINIUM

    € WEIGHT: 100kg

    € ARMOUR: 4mm Hardox for the back/scoop. The top and bottom panels are 5mm Titanium and the sloped sides are 6mm Hardox to sheild the wheels. At the front there is 4cm of Vulkanised Rubber to prevent hits from its own weapons, as well as other weapons, and on the sides and top, theres 1 inch of PU foam.

    € SHAPE: Low invertible box with a 42* front scoop (the scoop has a slight dip in it (set at 20*) to help get under other robots better) and 45* sloped sides and rear.

    € MOTORS: 2 x LEM 130€™s at 36V = 18HP

    € LOCOMOTION: 4 Vulkanised Wheels.

    € DIMENSIONS: (L) 85CM (H) 25CM (W) 80CM

    € COLOUR: Unpainted, with the exception of the name on top written in black paint and the discs and their teeth coloured black as well.

    € WEAPONRY: The weaponry consists of 3 x 9kg discs, 230mm in diameter, with the teeth made out of 1cm of Titanium with 3 Hardox bludgening teeth with spikes on them, shaped to rip and flip (TT). The discs are set on the same axle, and amounted 6cm into the scoop, with the teeth just reaching UNDER the lip of the scoop (4mm), so the uppercut movement of the discs can attack base-panels and the like. The discs are powered by 2 x LEM130s at 36V. Set on a ratio of 1.5:1, it gives off 3600rpm. One disc is 55kj. The discs, combined together make 27kg, so the force given out is 165kj per hit! The large amounts of Rubber amounted behind the scoop stops the risk of self-destruction.

    € SPEED: 20mph

    € GROUND CLEARANCE: 0MM-1CM. At the front, it is completely 0mm. On the sides/rear, its 0-1cm. On the sides and rear now are 4mm Titanium, and held on by Hardox hindges. The skirts join up at the corners of the robot and also are held down by Vulkanised rubber so theyre less likely to lift up.

    € STRENGTH: Weaponry.

    € WEAKNESS: No weaponry reversal if turned over.

    In addition Liam, that looks a very nice upgrade of System Shock

    (Message edited by paulc on July 11, 200

    (Message edited by paulc on July 11, 200

  5. Id like to see how you can get all that in those dimensions. :P

  6. #1546
    The teeth are made of Ti, and have additional Hardox teeth on them...

    ...what is the actual disc made of, Explodium?

  7. #1547

  8. quote:

    Id like to see how you can get all that in those dimensions. :P

  9. #1549
    Guest
    Thank you Paul

    And if I could just take this opportunity to say that be careful with Knyfe. You often say that none of your vapours have won heats, but I know that Knyfe is a potential winner big time. You have a really good robot on your hands here, but in RS!! Heat B you chose comletely the wrong setup to fight SGO, and Daniel himself said it. The ramming spikes did nothing, but the hinged spikes or wedge could have possibly defeated SGOs skirts and then the vacuum device would have been useless, allowing you to pit him. Im not criticising, just giving an opinion on a great robot that missed a good opportunity, but there could be plenty more in the future

  10. #1550

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •