Brutalis 1.0

Many people do not understand how large heavyweight robots actually are. I would possibly double the size of the dimensions you have given. Robots and vapourbots are getting smaller and smaller, but for this design you€™ll need bigger. I€™d suggest more along the lines of 80cm x 80cm x 25cm. That might even be pushing it as Nitrogen canisters are pretty large.

Are you looking to do some serious pushing? If so, then your drive train is fine, however you may have to make compromises elsewhere. If you just want a drive to get you around and do some ramming, just go for 2x S28-400€™s. I could suggest giving wheel dimensions and more detailed battery stats, but for now you€™re fine. Your 0mm ground clearance is fine, however please state how much clearance is behind the skirts, which I would suggest a minimum of 6mm.

Hardox is heavy stuff, for this purpose I€™d suggest around 4mm. For your flipper, you€™ll need to give a few details. First of all, what hinge is your flipper - rear hinged (like Chaos 2) or front hinged (like Firestorm)? How much gas do you have on board? What size are the rams operating the flipper? Look at fellow high-pressure flipper vapourbots to get an understanding.

But you€™ve made a good start with the basics. I€™ll let you fix that stuff up first.