The Crash & Burn Tournament: Extreme!

[paulc]

Right Martijn, I plan on facing Obelix Bulguous as I believe I could wipe it If I grab the wheels and shove into the pit - its gone!

All we need is Chris choice, and then we can kick some house-bot!

[dinowarrior]

I think Exa-Gore-Ic would be my best bet.

[steven_mcg]

Beep beep! Make way!

TEAM BRAVEHEART
ALL-STARS: Wedge Devolution & Killotine: EVO
MAYHEM: Metal Sonic Spin Dash, Whirligig 4.0 & Turbo Tails
CHALLENGE BELT: All Scoop and No Stab Make Steve a Dull Boy
FOOTBALL: Revenge of the Revenge of the Bludgeonator!
PINBALL: The Botles Reunited :wink:. Failing that, Turbo Tails.
SUMO BASHO: Metal Sonic Spin Dash
VENGEANCE: Drilla Killa Renaissance VS Richs latest Drilla Killa machine
FLIPPER FRENZY: Wedge Devolution
CRUSHING CALAMITY: Clawdius Decimus Murderous

All stats to be found here:
http://fvagroup.proboards39.com/index.cgi?board=bravehearthttp://fvagroup.proboards39.com/inde...ard=braveheart
http://www.fightingrobots.co.uk/discus/messages/760/7612.html?1171641438http://www.fightingrobots.co.uk/disc...tml?1171641438

[kodster]

Thanks Steve! And to Marti, Paul, and Chris for requesting the house bots they want to fight.

[matty_haka]

Ill enter.

I know Im being slow. but I am working on an all new squad.

[kodster]

No problem Matt.

[andrewj]

Yeah save me a place in this for now please, Id like to have a crack at designing some new ones for this.

[paulc]

Sorry - Ive just seen the Challenge Belt fights, and I wish to place forward (BEFORE ITS TOO LATE)MeCannibal

PS. If I have entered MeCannibal into too many things tell me, Im just putting a lot of my trust into it.

[knightrous]

Ill chuck some stuff in for old times sake...

Ramming Rave:

Name: Knightrous Wedge
Motivation: 6WD
Shape: A wedge shape like SJ (http://www.buildersdb.com/botpics/845.JPGhttp://www.buildersdb.com/botpics/845.JPG)
Speed: 40MPH
Weight: 100kg
Height: 320mm
Length: 750mm
Width: 650mm
Weapon: A speedy hydraulic front hinged lifter/flipper (0.25 second to do the full 120 degree movement) which is powered by a hydraulic motor geared 12:1 onto a crank shaft that lever on the lifting arm. (Diagram can be provided for Writer). The front wedge is made out of 10mm Hardox 500 and scraps the ground at 0mm.
Chassis/Armour: 5mm Hardox 600 sides, 8mm Titanium base and top. 3.25mm Hardox 450 floating skirts on the sides and back.
Drive: The drive is a hydra-static drive train. It has a 42HP Honda CR125 motor bike motor (2005 model) with a custom made swash plate hydra-static pump bolted to the motor output shaft. The hydra-static drive provides full motor torque at 0MPH right up to 40MPH (Electric motors and normal hydraulic drives cannot provide this feat, if you google hydra-static, you€™ll find out why). 6 x 120mm wheels that are 100mm wide provide the maximum traction when coated in 15mm of Urathane Rubber (Volcalon).
Notes: Gyro-stabalised and has an active traction control system build from a pair of 18X picaxe chips and some custom software and sensors. This will help maintain maximum control and handling at high speeds. Can self right with lifter and has 0mm ground clearance at the skirts and 15mm under the body. The robot also has rate limiting on the radio, so top speed can be set prior to the battle, to suit the opponent(s)

Advantages: The SPEED! The Pushability! The Strength!
Disadvantages: Having to keep your opponent in the arena long enough to have fun

Disco Ball:

Rogue

Motivation: Wheeled
Speed: 18.84KMH (11.775MPH)
Weight: 91.39kg
Height: 248mm
Length: 523mm
Width: 1040mm
Ground Clearance: 10mm under disc teeth and increases to 20mm at the back.
Weapon: The weapon is a 24.61 kg, 580mm (From tooth tip to tooth tip) diameter flywheel mounted on a 20 degree angle. The flywheel is powered by a 6.8kg 125cc 5.3Kw (7.06HP) Husqvana chainsaw with modified Astroflight electric starter motor. The chainsaw has a peak RPM off 8500rpm and is geared 3.4:1 with a kevlar innerbound belt drive to produce a flywheel speed of 2500rpm. The chainsaw has a centrifugal clutch that prevents the flywheel from spinning at idle and prevents the chainsaw from stalling by cutting out at 500-600rpm. The weapon has a tip speed of 273.14Km/h while producing around 32Kjs of Kinetic Energy. The teeth are based on a shark tooth design where a inner concave to cut though metal much quicker and easier. The teeth are CNC machine blocks of Hardox 650 Wareplating to maintain a near perfect cutting edge.
Drive: The drive is a pair of S28-400 Magmotors coupled to a pair of 8:1 aluminium planetary gearbox which gives a final output speed of 500rpm at the drive shaft. The wheels are 200mm (8inch) Colson wheels with 3.25 mm Hardox 450 protection plates and 8mm thick Grade 5 Titanium/Vandium domes with tip spikes. The wheels are mounted on 40mm hollow, 5mm wall Stainless Steel shafts for maximum strength.
Batteries: 2 x 24v 3600mAh NiCD Battlepacks producing 24v @ 7200mAh supply (Enough for 10mins of solid driving, 8 mins of driving with several motor starts)
Monocoque (Chassis/Armour): The monocoque (chassis & armour combined) is a fully tig welded 8mm thick Grade 5 Titanium/Vandium with support braces and inner bulk heads for maximum strength and rigidness.
Electronics: Runs a RoboWars.org BMC speed controller with Hitec Focus SS-3 75mhz PCM 3ch Radio and a 3-axis computer Gyro for maxium control and handling. Uses 150amp rated Anderson power pole connectors and locking pins. Electronics are shock mounted and mounting in a floating style encased in HD (High Density) foam.
Notes: Can selfright via off balance weight distribution when upside down and is added by the contact of the flywheel on the floor.

Mayhem:

Name: Mass Disctruction Revolution (MDR)
Motivation: Wheels
Speed: 10.5MPH
Ground Clearance: 10mm
Weight: 100kg
Height: 140mm
Length: 700mm
Width: 700mm
Weapon: MDR sports a nifty 25.69kg Titanium Spinning Rim. The spinning rim is powered by a C40 Magmotor on 36v and is geared 5:1, rotating the spinning shell at 1200rpm and should spin up in around 2 seconds to max speed.
Drive: 2 x S28 Magmotors on 36v geared 12:1 onto a 140mm diameter wheel. Wheels are coated in urethane rubber to get more traction. The combined drive has 8HP peak power.
Batteries: 120 x 3600mAh NiCad Cells made into 36v packs. Produces 36v @ 14.4Amp/Hours
Armor: 5mm Aluminium top and bottom.
Notes: Invertible and easily to drive.

Strengths: Spinning weapon can attack/defend from any direction and has a moderately good 4WD drive train.
Weakness: High ground clearance might leave it susceptible to wedges and flippers. Rammers may try to box rush.

Challenge Belt:

Name: Sauron - New Bot!
Motivation: 2WD
Speed: 8MPH Translational 80MPH Tip Speed
Weight: 100kg
Height: 150mm
Length: 600mm
Width: 600mm
Weapon: Translational Spinner - The robot itself is the weapon. It uses its drive and a custom made micro processor system similar to that used in a fellow translational spinner called Cyclone Bot to translate itself around the arena creating a €œVortex of Destruction€. Using 4 Hardox €œenlightened€ teeth, it tears its opponent to pieces when the teeth collide at a smashing 80MPH.
Drive: 4 x 12v D-Pack motors @ 26.4v, 2 motors per wheel with 150mm diameter 100mm wide urathane wheels, produces approx. 16 Peak HP
Batteries: 80 x A123 2300mAh @ 3.3v Lithium Nanophosphate Cells. Makes a 26.4v @ 23000mAh (23Amp/Hr) battery pack.
Armour/Chassis: 5mm Hardox 500, welded monocoque, internally braced for max strangth.
Notes: Invertible, is a ring shape with all the components hidding in the ring. Sloppy Render here:

All Stars:

Black & White - New Bot!
Stats here: http://crystalnode.net/vapourbots/blackandwhite.htmlhttp://crystalnode.net/vapourbots/blackandwhite.htmlhttp://crystalnode.net/images/Sauron1.pnghttp://crystalnode.net/images/Sauron1.png

[paulc]

Thanks Aaron, but you need three machines for the Mayhem.